SuzukiSavage.com - Tensioner time to replacement? and gasket.

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Tensioner time to replacement? and gasket.

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Tensioner time to replacement? and gasket. (Read 100 times)

kylejang Junior Member Offline SuzukiSavage.com Rocks! Posts: 91	Tensioner time to replacement? and gasket. 11/26/20 at 22:55:22 Hi again everyone. Today I checked my tensioner took some pictures please check let me know what you think. Thank you. One more question I guess gasket looks ok(clean and not bent)to reuse. Should I get new gasket or buy gasket sheet to make myself? If I buy gasket sheet what type and what mil will be gasket size?
Back to top	20201127_014028.jpg IP Logged

kylejang Junior Member Offline SuzukiSavage.com Rocks! Posts: 91	Re: Tensioner time to replacement? and gasket. Reply #1 - 11/26/20 at 22:58:08 Picture 2
Back to top	20201127_002513.jpg IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28771 L.A. California Gender:	Re: Tensioner time to replacement? and gasket. Reply #2 - 11/26/20 at 23:12:17 Recommended to change the chain at 18mm, you're almost 19mm. Or you can extend the tensioner. You must have one of the newer metal gaskets, I hear they are safe to use again.
Back to top	Versey's Place Tech Section Index IP Logged

kylejang Junior Member Offline SuzukiSavage.com Rocks! Posts: 91	Re: Tensioner time to replacement? and gasket. Reply #3 - 11/27/20 at 06:49:54 Hi verslagen1. How can I get your tensioner? Should I send my tensioner to you? I am not in rush to finish job. Yes gasket is metal type not a paper type. I inspected surface looks good. does anyone reuse and have problems?
Back to top	IP Logged

norm92de Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1180 El Paso TX Gender:	Re: Tensioner time to replacement? and gasket. Reply #4 - 11/27/20 at 08:20:42 The newer gasket is made of metal and is reusable. At least I reused mine, no leaks. Your tensioner needs to be extended with Versy's mod. You're almost there.
Back to top	2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic. IP Logged

kylejang Junior Member Offline SuzukiSavage.com Rocks! Posts: 91	Re: Tensioner time to replacement? and gasket. Reply #5 - 11/27/20 at 10:01:58 Thank you all. I will get tensioner from verslagen1 for sure.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28771 L.A. California Gender:	Re: Tensioner time to replacement? and gasket. Reply #6 - 11/27/20 at 11:45:21 kylejang wrote on 11/27/20 at 06:49:54: Hi verslagen1. How can I get your tensioner? Should I send my tensioner to you? I am not in rush to finish job. Yes gasket is metal type not a paper type. I inspected surface looks good. does anyone reuse and have problems? you got mail
Back to top	Versey's Place Tech Section Index IP Logged

zipidachimp Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1392 surrey, b.c. Gender:	Re: Tensioner time to replacement? and gasket. Reply #7 - 12/01/20 at 21:17:08 I've re-used my gasket 3 times, no leaks. I put it between 2 boards and hammer it flat. Works great ! cheers! ps: switch your caliper to 'mm' and re-measure !
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17825 Camp Springs, Kentucky Gender:	Re: Tensioner time to replacement? and gasket. Reply #8 - 12/03/20 at 03:20:39 zipidachimp wrote on 12/01/20 at 21:17:08: : switch your caliper to 'mm' and re-measure ! O.746" 1" = 25.4 mm 0.746 x 25.4 = 18.9 mm
Back to top	Someday I will be old......But not today! IP Logged

Pages: 1

« Home