SuzukiSavage.com - M Unit, M switches, new throttle control?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › M Unit, M switches, new throttle control?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

M Unit, M switches, new throttle control? (Read 30 times)

ghryx

YaBB Newbies

Offline

argh.

Posts: 40

M Unit, M switches, new throttle control?
05/13/20 at 16:14:22

So I'm waaaay into the point of no return on my cafe conversion. I picked up a motogadget M Unit to do the rewire, and am on the fence about grabbing a couple of M Switches to replace the stock controls and really clean up the front end.

BUT, the stock start/kill switches integrated into the throttle are big and bulky and if I'm going to do this, it would be silly to leave them there, add an M Switch and now have controls that don't do anything.

Soooo, I guess the question is, has anyone put an aftermarket throttle control on your Savage? Every step of this project introduces a head-scratcher I didn't anticipate.

IP Logged

ZSteele Senior Member Offline I'll finish it tomorrow Posts: 253	Re: M Unit, M switches, new throttle control? Reply #1 - 05/13/20 at 16:41:35 I did, not that hard actually but it's probably going to require making new throttle cables. If you're already going the route of an M.unit, I would spring for micro switches and really tidy up the front end. I used 2 motone 3 buttons for mine.
Back to top	IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1431	Re: M Unit, M switches, new throttle control? Reply #2 - 05/13/20 at 17:40:01 Did the gadget. Found a push/pull throttle on Ebay. using the micro switches. Low bars. Conventional looking master cylinder.
Back to top	Savage_Motogadget_001.jpg In theory, theory and reality are the same. In reality, they aren't... IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home