1997savagedude
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 29
|
ok. im gonna make my best attemt at explainig what i did and how. 97ls650, velocity stack (with filter net dont freak out) mikuni vm36, quad flow torque wing, dial a jet, U.F.O.(yes the new one!!! i had to wait till december for them to come out for sale i was one of the first to get one according to lonn at thunder products. He actually sold me an old one that wont fit the newer vm36 by accident (mikuni made the slide 1mm narrower so old slide wont fit) , and put the new ones into high gear for manufacturing to get me one. his mistake made him move on the new ones. lonn is awesome, thanks lonn! the airflow on the new ones in much improved im told. 12.5 pilot ( i was wrong about 15 pilot, it WAS idling too high.) 12.5 pilot and about 2 turns out on the air screw and it idles right around 1100 RPMs like supposed too. i did a mild polish of both intake and exhaust ports, stage 3 webcam cam, wiseco 10:1 94 mm piston (no bore just higher compression) nology plug wire, Krank vent crankcse breather, 1,000,000 cosmetic changes, ill post some pics soon. gotta take some. anyway.....IT FREAKING RIPS!!!! It is super fast off the line, 0-60 is almost too fast for a cruiser in my opinion, then just good acceleration to about 80, then pulls slowly to 90. i weigh 280 lbs, AND GET THIS, i am at 8,000 ft. of altitude in Colorado mtns. (lots of tool time in winter) so i am taking it down to death valley area to do some time trials. 0-60 and 1/4 mile times. i cant tell you the H.P. yet. MY buddies brand new Dyno sits unusable and not set up because of virus b.s., im dying to find out what its putting out and will post as soon as i know. Also my buddy who is a famous motorcycle mechanic who asked to not be mentioned....did the tuning for me and i forgot to ask waht size main he used. ill find out. also i have one of those Mac headers and reverse cone exhaust combo most say the header is too big. my header inside diameter appered to be a little over 1.7 inches ID (finally got acurte measurement). Seems to work killer. a little smaller ID may be better but i darn sure aint complaining, it is a totally transformed machine. fire away.
|