SuzukiSavage.com - size of clutch nut

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › size of clutch nut

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

size of clutch nut (Read 43 times)

jswalton84 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	size of clutch nut 01/03/20 at 22:07:13 looking for the size of the clutch nut 06 ls650 clutch is shot and so is the throw out bearing the person who owned the bike before me, never showed it any love :'(
Back to top	IP Logged

jswalton84 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Re: size of clutch nut Reply #1 - 01/03/20 at 22:07:41 https://www.suzukipartshouse.com/oemparts/a/suz/506b36bcf870022ba8af9e45/clutch part number 5
Back to top	IP Logged

jswalton84 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Re: size of clutch nut Reply #2 - 01/03/20 at 22:10:30 also since i own a 2006 it would be model k6 correct?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28780 L.A. California Gender:	Re: size of clutch nut Reply #3 - 01/03/20 at 22:39:22 it's either a 30 or 32 mm harbor freight has a set of metric impact sockets that'll do the job.
Back to top	Versey's Place Tech Section Index IP Logged

jswalton84 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Re: size of clutch nut Reply #4 - 01/04/20 at 00:11:22 thanks so much for the response,
Back to top	IP Logged

DragBikeMike Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 4222 Honolulu	Re: size of clutch nut Reply #5 - 01/04/20 at 20:13:09 It's a 32mm wrench size, which is directly equivalent to a 1-1/4". The thread series is M22 x 1.00 pitch.
Back to top	Knowledge is power. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home