Yep, the connector is not compatible. I would suggest soliderless connectors over caps. Caps are for home wiring, not for vehicles. You could use butt connectors or a male/female. I’d use the m/f with opposite gendering on the hi and low, and a unique one for the ground. If you want to get fancy you can de-pin the LED and re-pin it for the OEM harness. I have a link (on my computer...on my phone now) for OEM motorcycle connectors if you are interested.

That headlight is the H4 type connection headlights have been using for cars and motorcycles for years.  No sense for a company selling a universal headlight to put a special connection on it.

Im sure you can buy an adapter, it just might get tight in there for space.

This one looks similar, but you would have to check if its the same.
https://www.cjponyparts.com/rigid-industries-h13-to-h4-adaptor/p/RIG55007/?ye...

This is one of the best LED's for the Savage, as the driver is internal and it is pretty compact, it doesn't need adapters, and it works well with the rubber seal.

https://www.superbrightleds.com/moreinfo/miniature-and-subminiature-bulbs/mot...

[quote author=58636E7968647F79626A67780B0 link=1578009728/0#5 date=1578055955]This is one of the best LED's for the Savage, as the driver is internal and it is pretty compact, it doesn't need adapters, and it works well with the rubber seal.

Thank you both so much for the useful information I really appreciate it.
As I was scrolling around reading through some old posts I had seen again I realized I could detach the plug directly from the bulb and that had a n H4 female connector that fit directly with the LED 3 prong plug and I attached it to the bike and it worked the only thing is the bucket housing just can’t fit the significantly larger LED lamp so I ordered a larger bucket. This is definitely a more expensive way than the LED you linked me too and more cumbersome but I’m confident it’ll work out in the end and if not I now at least have a back up plan! The LED I purchased does have the turn signal indicators in it I just have to wire them
Correctly to work. Now if only I could get the headlight wiring schematics that aren’t blurred by photobucket  

so I set up the LED Headlight.

Before
" alt="" title="" border="0" />

After:
" alt="" title="" border="0" />

Now I'm just trying to figure how to connect this blue wire to the mint wire coming from the bike so the halo and turn signals work.. do I splice the two cables and just wrap them together? any ideas?

" alt="" title="" border="0" />