SuzukiSavage.com - Generic alternative for breather hose?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Generic alternative for breather hose?

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Generic alternative for breather hose? (Read 40 times)

Mavigogun Serious Thumper Offline We roll farther together Posts: 775 Progressive Texas	Generic alternative for breather hose? 11/01/19 at 08:56:27 My breather hose cracked while trying to get the baked end back over the head cap nipple. Is there an acceptable part widely available, say, at a national chain? Meanwhile, I'll try to cut it shorter, refit...
Back to top	2007 LS650 s40, presently being rebuilt IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Generic alternative for breather hose? Reply #1 - 11/01/19 at 12:42:44 That tubing isn't anything special. I replaced it with silicone tubing.
Back to top	Versey's Place Tech Section Index IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2633 Amongst the Twisty Roads	Re: Generic alternative for breather hose? Reply #2 - 11/01/19 at 12:58:22 I think mine is 3/8" rubber heater hose from the autoparts store
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

batman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3806 osceola new york Gender:	Re: Generic alternative for breather hose? Reply #3 - 11/01/19 at 14:41:09 I wouldn't cut it to much shorter , it needs to be arched to allow the oil droplets to run back into the motor, it might even help to make it slightly longer if you can.
Back to top	my old work mates called me MacGyver IP Logged

Mavigogun Serious Thumper Offline We roll farther together Posts: 775 Progressive Texas	Re: Generic alternative for breather hose? Reply #4 - 11/01/19 at 15:33:13 Thanks, all. After visiting several places with growing frustration, I spliced in a section of anodized aluminum tubing.
Back to top	4AD07ADB-94B4-4861-A9C5-A8EDC8248514.jpeg 2007 LS650 s40, presently being rebuilt IP Logged

Pages: 1

« Home