Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
fix it so it brakes, ryca (Read 138 times)
Matchless G11
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 451
Newfoundland NJ
fix it so it brakes, ryca
06/29/19 at 11:05:16
 
Does any one know the cross reference for the brake pads that ryca sells for it brake upgrade?
I would like to get some softer pads. The brake feels like to one that I had on my Guzzi 850t ,  just like a block of wood against the rotor.
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28890
L.A. California
Gender: male
Re: fix it so it brakes, ryca
Reply #1 - 06/29/19 at 19:27:50
 
find out the p/n for the caliper then find out what uses it.
I think the bikebandit site can do that.
Back to top
 
 
WWW   IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 5112
Manteca , CA
Gender: male
Re: fix it so it brakes, ryca
Reply #2 - 06/29/19 at 20:34:54
 
I believe they are the same as the pads as 1980 Yamaha SR 500
Very available in several compounds for many suppliers
But double check that before you buy them
Back to top
 
 

The Topic Terminator
  IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 5112
Manteca , CA
Gender: male
Re: fix it so it brakes, ryca
Reply #3 - 06/30/19 at 01:05:28
 
RycaShawn would know , he builds the kits.
Back to top
 
 

The Topic Terminator
  IP Logged
Matchless G11
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 451
Newfoundland NJ
Re: fix it so it brakes, ryca
Reply #4 - 06/30/19 at 06:56:32
 
Gary_in_NJ wrote on 06/29/19 at 15:51:12:
Just cut out all of the discovery and steps in between and get a BBK


The bike already has the bbk from the previous owner, I just don't know what pads go into it.
Back to top
 
 
  IP Logged
Gary_in_NJ
Serious Thumper
*****
Offline

LS650 Cafe Racer

Posts: 2633
Amongst the Twisty Roads
Re: fix it so it brakes, ryca
Reply #5 - 06/30/19 at 08:03:00
 
If it’s the same BBK I have, then the caliper is from a first generation Yamaha R1. Is this the BBK with the 320mm rotor?
Back to top
 
 

A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
  IP Logged
Matchless G11
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 451
Newfoundland NJ
Re: fix it so it brakes, ryca
Reply #6 - 06/30/19 at 15:08:47
 
yea it is a 320 mm
Back to top
 

brake_2.JPG
  IP Logged
Matchless G11
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 451
Newfoundland NJ
Re: fix it so it brakes, ryca
Reply #7 - 06/30/19 at 15:13:18
 
Matchless G11 wrote on 06/30/19 at 15:10:11:
Gary_in_NJ wrote on 06/30/19 at 11:59:58:
The SR 500 is a great bike. If you find one at a good price, run to the light


I am looking a SR400 myself, The ryca is a bit too café for me.


The sad thing is most all the sr500 I seen have been café or bobered out (badly)  Sad
Back to top
 
 
  IP Logged
Gary_in_NJ
Serious Thumper
*****
Offline

LS650 Cafe Racer

Posts: 2633
Amongst the Twisty Roads
Re: fix it so it brakes, ryca
Reply #8 - 06/30/19 at 16:30:42
 
Matchless G11 wrote on 06/30/19 at 15:08:47:
yea it is a 320 mm


2004-2005 YZF-R1 rotor, caliper and pads.
Back to top
 
 

A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
  IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 18105
Camp Springs, Kentucky
Gender: male
Re: fix it so it brakes, ryca
Reply #9 - 06/30/19 at 18:40:05
 
We may be talking apples/oranges a bit here.

MatchlessG11 has the early 2 piece (inner/outer) brake.....and I believe that Gary_from_NJ may have that style as well.

Later kits used a 1 piece Rotor that Shawn had specially made and it is not from any bike....but it uses the same caliper as the earlier kits.

I have had good luck with the EBC organic brake bads on the 2 piece rotors, I have not yet found a pad that I like on the 1 piece rotors.  The EBC organics squeal at slow speeds on the 1 piece rotors and don't seem to brake as strongly.  If I apply the brakes and get the rotor warm the squeal goes away - but as soon as it cools the squeal comes back.

I just got a set of Galfer Semi Metallic (G1054) pads to try on the 1 piece rotor, and I will give you a report in the next couple weeks after I get some miles on them.

Back to top
 
« Last Edit: 08/20/19 at 04:18:23 by Dave »  

Someday I will be old......But not today!

  IP Logged
Gary_in_NJ
Serious Thumper
*****
Offline

LS650 Cafe Racer

Posts: 2633
Amongst the Twisty Roads
Re: fix it so it brakes, ryca
Reply #10 - 06/30/19 at 18:53:56
 
I do have the floating two piece (S40 inner / R1 outer). I looked at Matchless’ photo to be sure he has the same caliper that I do. His bracket and caliper do appear to be the same.
Back to top
 
 

A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
10/04/24 at 06:27:44



General CategoryRubber Side Down! › fix it so it brakes, ryca


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.