SuzukiSavage.com - Air fuel mixture screw.

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Air fuel mixture screw.

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Air fuel mixture screw. (Read 61 times)

BangAlong

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 3

Air fuel mixture screw.
12/27/18 at 15:24:45

Hi guys, first post ever so remove it if it’s in the wrong place.
I drilled out the brass button to adjust the air fuel mixture screw and from factory the screw was seated. Has anyone ever come across that?? So I screwed it out 1 1/2 turns and fitted a slip in can. Running better than it ever has. Still going to rejet the carb but here in New Zealand we can only buy single jets and not in packs of different sizes.

IP Logged

Hiko Senior Member Offline SuzukiSavage.com Rocks! Posts: 250 Tauranga New Zealand Gender:	Re: Air fuel mixture screw. Reply #1 - 12/27/18 at 19:43:58 Hi Bangalong I am in New Zealand and can help you out with some main jets probably Pm me with what you need Rejetting my bike to the advice on here made a huge difference to my bike
Back to top	IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2625 Amongst the Twisty Roads	Re: Air fuel mixture screw. Reply #2 - 12/27/18 at 19:46:30 Is it possible that in the process of drilling out the plug that you spun the screw, making it appear seated?
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

BangAlong YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	Re: Air fuel mixture screw. Reply #3 - 12/27/18 at 20:10:28 I guess that is a possibility that the drill bit nicked that screw and seated it but when I screwed it out it’s the best it’s ever been. Before even on a hot day I would have to pull the choke out to its first stain to start and idle it to warm up, today went out and no choke it started fine.
Back to top	IP Logged

BangAlong YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	Re: Air fuel mixture screw. Reply #4 - 12/27/18 at 20:12:11 Hi Hiko, I can’t PM yet until I have a post count of 10 or something like that. What part of New Zealand? I’m Taranaki
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10603
Oklahoma
Gender: male

Re: Air fuel mixture screw.
Reply #5 - 12/27/18 at 22:52:56

Suzuki sets the fuel/air ratio rediculously LEAN from the factory to pass exhaust emissions tests of countries. In the US dealer mechanics will routinely tell you that the backfiring of this engine is “NORMAL”.
S U R E I T I S ! 😏
Not !
A little adjustment and a jet change and Like Magic no backfires and it runs good. How about that. 😉

IP Logged

Hiko Senior Member Offline SuzukiSavage.com Rocks! Posts: 250 Tauranga New Zealand Gender:	Re: Air fuel mixture screw. Reply #6 - 12/28/18 at 00:16:01 Bangalong I have sent you a PM
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home