Dave
YaBB Moderator ModSquad
Online
SuzukiSavage.com Rocks!
Posts: 17888
Camp Springs, Kentucky
Gender:
|
The problem with rotating wheels....wire or scrubby, is that they will round off the edges of the soft aluminum.
I try using a plastic scraper first...it is one I made by sharpening a piece of plexiglass. I also have some Ebony wood that work well and is sharpened with the same sharp edge as the plexiglass, and as a last resort I will use an industrial razor blade. You have to be very careful when using a razor blade - keep it very flat and be careful not to make any gouges...your goal is to use it as a wedge between the gasket and aluminum. (It needs to be a very new razor blade without any nicks or burrs in the cutting edge).
|