Dave
YaBB Moderator ModSquad
Offline
SuzukiSavage.com Rocks!
Posts: 18101
Camp Springs, Kentucky
Gender:
|
Go to the Marketplace section, and you will find the folks that can help you.
You may not need a big bore if your cylinder is in good shape.....Lancer has 94mm Wiseco pistons custom made, and they only need a honing to make a nice cross hatch for the rings to seat if the cylinder is good. The extra compression makes for a nice power increase (at the expense of using premium fuel). Lancer also provides the performance cams and carb kits.
If you are tearing the engine down to the point the cylinder is removed, you might as well get a new Nitrided cam chain from Lancer and start from scratch. Later on you can get the extended tensioner from Verslagen.
You definitely want the head plug from Verslagen. They don't leak like the stock ones do.
The stock clutch works fine as long as you don't use oil with Friction Modifiers. The forum recommends Rotella T4 if you want conventional oil, T6 if you want synthetic.
|