Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Technical Documents/Reference
› LED Tail Light License Plate Bracket
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
LED Tail Light License Plate Bracket (Read 170 times)
ruckus430
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 134
LED Tail Light License Plate Bracket
01/07/18 at 03:22:19
Found this perfect LED Tail Light License Plate holder with integrated license plate lights that fits under the stock fender for a clean and simple look.
Here is the plate from amazon, its actually a side mount bracket but just toss the side mount and use the plate itself.........
https://www.amazon.com/gp/product/B016Z0LWJQ/ref=oh_aui_detailpage_o03_s00?ie...
Essentially just use the stock bracket and cut the lower third piece off and drill holes as need in the middle section to accomodate the new bracket, and put spacers in between the fender and the 3 screw that secure the bracket to the fender to give the appropriate angle so that the led brake light will aim upwards and be somewhat flush with the fender.
Also some bonus pics of my led headlight
Back to top
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18076
Camp Springs, Kentucky
Gender:
Re: LED Tail Light License Plate Bracket
Reply #1 -
01/08/18 at 04:33:13
That tail light appears to match the shape of the fender really well.
You should get a buddy to follow you in bright sunshine and see how bright the brake light is when the sun is hitting it. So many of the aftermarket LED lights just aren't as bright as the stock lights, and in daylight they are nearly invisible unless you are staring right at them - which is not something that soccer moms and texting teens are likely to do! Your brake light and turn signals need to be really bright if they are going to help keep you safe.
Back to top
Someday I will be old......But not today!
IP Logged
ruckus430
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 134
Re: LED Tail Light License Plate Bracket
Reply #2 -
01/08/18 at 20:10:31
Thanks for the tip, I plan on installing a second set of running and brake leds on the sides of the plate bracket or the fenders to increase visibility, although my first impression is that it is very bright but I will have my dad ride behind to verify.
Back to top
IP Logged
IslandRoad
Serious Thumper
Offline
It doesn't vibrate,
it purrs!
Posts: 1147
The Kiewa Valley, Australia
Gender:
Re: LED Tail Light License Plate Bracket
Reply #3 -
01/09/18 at 00:50:01
That's a real tidy looking tail-light/licence plate setup!
Back to top
S40, 2014, Dyna, Raptor, 52.5/152.5, spacer mod, sea level, cat-eye LED tail light, bullet style halogen turn signals, 'Superbars' with custom 40mm risers, modified stock seat, Metzeler tyres.
IP Logged
ruckus430
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 134
Re: LED Tail Light License Plate Bracket
Reply #4 -
01/09/18 at 23:15:29
Thanks! Hope it will help someone in the future with options for tail lights, I spent time looking at the other members who had installed cat eye brake lights.
Back to top
IP Logged
IslandRoad
Serious Thumper
Offline
It doesn't vibrate,
it purrs!
Posts: 1147
The Kiewa Valley, Australia
Gender:
Re: LED Tail Light License Plate Bracket
Reply #5 -
01/10/18 at 17:47:59
ruckus430 wrote
on 01/09/18 at 23:15:29:
Thanks! Hope it will help someone in the future with options for tail lights, I spent time looking at the other members who had installed cat eye brake lights.
I went with the cat eye. I started with a halogen light. It mounted well, but it always bugged me how far it stuck out. I switched to the LED version. It tucked right under the fender. It's also DOT rated!
The only issue left was the licence plate light. I used some licence plate bolts that had LED lights in them - pretty sure they wouldn't meet spec, but I don't usually ride at night anyway.
Back to top
S40, 2014, Dyna, Raptor, 52.5/152.5, spacer mod, sea level, cat-eye LED tail light, bullet style halogen turn signals, 'Superbars' with custom 40mm risers, modified stock seat, Metzeler tyres.
IP Logged
ruckus430
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 134
Re: LED Tail Light License Plate Bracket
Reply #6 -
01/10/18 at 21:46:36
I took a look through your previous posts but couldn't find a good view of your plate setup, would you linking me to an example? Im curious now
Back to top
IP Logged
IslandRoad
Serious Thumper
Offline
It doesn't vibrate,
it purrs!
Posts: 1147
The Kiewa Valley, Australia
Gender:
Re: LED Tail Light License Plate Bracket
Reply #7 -
01/15/18 at 01:31:28
Here ya go:
Back to top
S40, 2014, Dyna, Raptor, 52.5/152.5, spacer mod, sea level, cat-eye LED tail light, bullet style halogen turn signals, 'Superbars' with custom 40mm risers, modified stock seat, Metzeler tyres.
IP Logged
ruckus430
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 134
Re: LED Tail Light License Plate Bracket
Reply #8 -
01/15/18 at 21:33:42
Thats a very clean setup IslandRoad, I would have copied you if I went with the cat eye nice work.
Back to top
IP Logged
IslandRoad
Serious Thumper
Offline
It doesn't vibrate,
it purrs!
Posts: 1147
The Kiewa Valley, Australia
Gender:
Re: LED Tail Light License Plate Bracket
Reply #9 -
01/15/18 at 23:43:26
Cheers
Back to top
S40, 2014, Dyna, Raptor, 52.5/152.5, spacer mod, sea level, cat-eye LED tail light, bullet style halogen turn signals, 'Superbars' with custom 40mm risers, modified stock seat, Metzeler tyres.
IP Logged
GT61 TURBO ZX14
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 230
Minnesota
Gender:
Re: LED Tail Light License Plate Bracket
Reply #10 -
01/20/18 at 15:53:14
I like it a lot do you have an idea for a front LED light
Back to top
«
Last Edit: 01/21/18 at 03:29:48 by Dave
»
Out of all the things I treasure most my mind is what I miss the most.
IP Logged
ruckus430
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 134
Re: LED Tail Light License Plate Bracket
Reply #11 -
01/21/18 at 00:44:28
Heres a quick summary of what I did to fit a LED headlight into a VZ Marauder Headlamp housing that should bolt straight onto a suzuki savage.
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1514882803
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
- Rubber Side Down!
»» Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/07/24 at 16:32:13
›
General Category
›
Technical Documents/Reference
› LED Tail Light License Plate Bracket
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.