SuzukiSavage.com - The height of generator cover.Help!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › The height of generator cover.Help!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

The height of generator cover.Help! (Read 53 times)

Alchernatal

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 5
Moscow, Russia
Gender: male

The height of generator cover.Help!
09/25/17 at 14:39:36

Hi guys! I'm new. My English is not very good, but I will try to be clear.
Suddenly I bought this fine classic iron and simple motorcycle. But I do not know the exact year of its production. The gearbox has 5 speeds, it means not earlier than 1993. I want to know if I have a potential starter problem. But I do not have a gasket so I can not remove the generator cover now to see it. I know that on models since 1996 this problem was fixed by Suzuki, putting another gear and a deeper generator cover. I measured the thickness of this cover to determine if I have this problem. It is approximately 74-75mm. The method of measurement is in the picture. Please see what is the thickness of this cover on your bikes.

IP Logged

Alchernatal YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5 Moscow, Russia Gender:	Re: The height of generator cover.Help! Reply #1 - 09/25/17 at 14:43:09 System does not let to attach pictures for the 1st message. Try now
Back to top	IP Logged

Alchernatal YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5 Moscow, Russia Gender:	Re: The height of generator cover.Help! Reply #2 - 09/25/17 at 14:45:47 No. Lets go other way https://drive.google.com/file/d/0BxbPVoRQoIWSazJiTjV5dWRwNWM/view?usp=sharing https://drive.google.com/file/d/0BxbPVoRQoIWSdmZscmlrMGhMR3c/view?usp=sharing Admins, sorry!
Back to top	IP Logged

batman

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 3806
osceola new york
Gender: male

Re: The height of generator cover.Help!
Reply #3 - 09/25/17 at 14:54:55

First ,off didn't you receive the title ,when you got the bike?If you what to know the year ,it is on the steering neck (where the forks go through the frame.,on the right side .) the difference in the side covers is inside,the newer gear being made of layers is wider than the old solid gear.The covers look the same from the outside.

my old work mates called me MacGyver

IP Logged

verslagen1

YaBB Moderator
ModSquad

Online

Where there's a
will, I want to be
in it.

Posts: 28889
L.A. California
Gender: male

Re: The height of generator cover.Help!
Reply #4 - 09/25/17 at 15:00:44

Alchernatal wrote on 09/25/17 at 14:39:36:

I know that on models since 1996 this problem was fixed by Suzuki, putting another gear and a deeper generator cover. I measured the thickness of this cover to determine if I have this problem. It is approximately 74-75mm. The method of measurement is in the picture. Please see what is the thickness of this cover on your bikes.

The thickness is the same for all years.
They removed material from inside to accommodate the torque limiter gear.
So you can not figure this out from the outside.

What's the engine number?

Versey's Place
Tech Section Index

IP Logged

Alchernatal

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 5
Moscow, Russia
Gender: male

Re: The height of generator cover.Help!
Reply #5 - 09/25/17 at 16:01:24

The bike is used from Japan. They never specify the year of production, only the first registration. It may be different. The Japanese rules and conceptions are very hard to understand. They have not VINs for domestic market. Our Russians businessmen like to underestimate the year for the Customs. So I have two dates- 1994 from Customs and 1996 from seller. I even contacted to Japan Suzuki through my partner-Japanese from US to clear the question by the frame number. They asked- you will laugh- "The model year of your motor cycle is 1986, and the style name is Suzuki NP41A. They said there were two handle styles – “flat handle” (LS650F) and “up handle” (LS650U), and yours appears to be LS650U."
The number of the frame NP41A-103339, engine P401 115290.

IP Logged

Alchernatal YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5 Moscow, Russia Gender:	Re: The height of generator cover.Help! Reply #6 - 09/25/17 at 16:11:46 By the way, the starter works perfectly, there are no extraneous knocking at the start and after the motor has stopped. In what way is this problem expressed? Knocking? Blows? Scraping?
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Online

Where there's a
will, I want to be
in it.

Posts: 28889
L.A. California
Gender: male

Re: The height of generator cover.Help!
Reply #7 - 09/25/17 at 18:28:08

Alchernatal wrote on 09/25/17 at 16:01:24:

The number of the frame NP41A-103339,
engine P401 115290.

Our VIN numbers don't work for Euro models.

Some engine numbers...

1986.....P401-104xxx
1987.....P401-113xxx
1995.....p401 131xxx
1996.....P401-135xxx
1997.....p401-139xxx
1997.....P401-140xxx
1997.....P401-143xxx
2000.....P401-152xxx
2001.....p401-152xxx
2002.....P401-154xxx
2002.....p401-155xxx
2002.....p401-156xxx
2006.....P401-166xxx
2006.....P401-169xxx
2008.....P401-175xxx
2009.....P401-175xxx
2014.....P401-1837xx

Versey's Place
Tech Section Index

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home