Hello all,
Upgraded my muffler to HD Softail - much better sound and looks much cleaner
I used one of the flex exhaust repair kits that allowed me to move muffler past the rear brake lever.
I adjusted Idle Mix screw as per EssForty and Serowbot's posts as well. At 3400 feet above the sea level it turned out to be 1 3/4 turns out from the closed postion. Still pops a little between 3 and 4 gear and does the dog fart after shut off. So may need to adjust it more or possibly get the jet kit.
Anyways, after few days I noticed that oil started collecting under the lower bolt that holds the kick stand :'(. Not much, may be a drop, no puddle underneath or anything. I can only find out about it if I reach to the bolt and feel under. From what I read looks like that bolt was loose when I removed the heat shield on the other side. I torqued all the bolts to the spec (the ones on the other side as well) but still there is small oil seepage.
Is there a crush washer that I've missed? Thank you