SuzukiSavage.com - Tergi's build threads

tergi

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 18
Rovigo Italy
Gender: male

Tergi's build threads
05/24/17 at 06:55:52

Hi, this is my Savage proyect, i start in january.
First of all i buy a rear fork from a Monster s4r

So i remove the Savage fork

end i made some spacer and a new wheel pin

first fit test

and the rear oil/gas shock absorber from a Hypermotard
but in this photo there is the monster shock

So i havent use the Ducati lever system and the spring is to soft, i have made a 3cm spacer in teflon to compress the spring.

Back to top

IP Logged

rich8363 Junior Member Offline SuzukiSavage.com Rocks! Posts: 70 Boynton Beach FL Gender:	Re: Tergi's build threads Reply #1 - 05/24/17 at 07:00:41 Very Cool
Back to top	IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2635 Auburn, AL Gender:	Re: Tergi's build threads Reply #2 - 05/24/17 at 07:04:28 This is insane (in a WOW kind of way). It amazes me what some people are capable of both envisioning and fabricating.
Back to top	2008 \| 152/52.5–Air Mix 3/4 \| Rotella T4 \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2630 Amongst the Twisty Roads	Re: Tergi's build threads Reply #3 - 05/24/17 at 07:08:49 Holy Crap! That is some serious fabrication and modification. I can't wait to watch this build unfold.
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

tergi

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 18
Rovigo Italy
Gender: male

Re: Tergi's build threads
Reply #4 - 05/24/17 at 07:18:49

So i made the frame fot the seat

end i fit the front fork from a Ducati Hypermotard

And i made the battery box

After the paint i start to reasseble the bike

One of the greatest problem was the handlebars...the ducati was 22mm but is idroformed to 27mm in the middle and the savage is 25mm, so i use a 22 one with a central riser spacer to 27 and a little spacer for the gas trottle to 25mm.

it's alive

Back to top

IP Logged

tergi YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 18 Rovigo Italy Gender:	Re: Tergi's build threads Reply #5 - 05/24/17 at 07:44:48 Thanks so much !!!!! sorry for my english.... this is the convertion from cable to hydraulic for the rear brake system: this is the original one that's all for the moment...
Back to top	IP Logged

ohiomoto Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2711 WTF is JOG?	Re: Tergi's build threads Reply #6 - 05/24/17 at 11:54:14 Cool!
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17893 Camp Springs, Kentucky Gender:	Re: Tergi's build threads Reply #7 - 05/24/17 at 12:11:16 Wow...it is pretty amazing what you have been able to get done between 6:55 and 7:44 today! I expect you will be riding by this time tomorrow!
Back to top	Someday I will be old......But not today! IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Tergi's build threads Reply #8 - 05/24/17 at 12:43:20 Wish I'd said that. Very nice work.. and as Dave points out, Dude, you're Fast!
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

tergi

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 18
Rovigo Italy
Gender: male

Re: Tergi's build threads
Reply #9 - 05/25/17 at 05:00:00

Dave wrote on 05/24/17 at 12:11:16:

Wow...it is pretty amazing what you have been able to get done between 6:55 and 7:44 today!

I expect you will be riding by this time tomorrow!

yes it's because the time running different in the USA...so if you take one minute in Usa isn't like a minute in Italy... Usa is about 10.000.000 km2, Italy is 300.000 km2 and 1 minute in Italy is to little and compressed....
Why the best Watchs are made in Switzerland? because is a small place and the time is hyper compressed.

So this morning I've start to fit the Kawasaki pulleys and belt, first of all i have made an alluminium spacer:

SO i start to mill the kawasaki pulley but my lathe is to small and i can't block it, So i start the front turn indicator plate:

general view:

that's all.

Back to top

IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2630 Amongst the Twisty Roads	Re: Tergi's build threads Reply #10 - 05/25/17 at 05:15:50 That is not all Mister! We want detail photos. What's it like to ride. How did it change your your life? We want details man.
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

rich8363 Junior Member Offline SuzukiSavage.com Rocks! Posts: 70 Boynton Beach FL Gender:	Re: Tergi's build threads Reply #11 - 05/25/17 at 06:12:43 Wow !!!!
Back to top	IP Logged

xaman Junior Member Offline SuzukiSavage.com Rocks! Posts: 97	Re: Tergi's build threads Reply #12 - 05/25/17 at 07:17:42 Woah! Awesome build. I bet those brakes work real good Love it. Give as many details as you can.
Back to top	IP Logged

tergi

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 18
Rovigo Italy
Gender: male

Re: Tergi's build threads
Reply #13 - 05/29/17 at 08:42:08

Spec:
fork Ducati Hypermotard with 2x 4 pot brembo radial caliper
forged aluminium Marchesini wheels
rear arm Ducati monster s4r
rear shock absorber Sachs oil/gas Ducati Hypermotard
reard Brembo single pot caliper from Ducati Monster s4r
front periferic Brembo master cylinder
rear Brembo master cylinder
belt trasmission from Kawasaki gpz
carbon fibre front fender Ducati Performance
rear fender homemade
homemade exhaust

some exhaust photo:

Back to top

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17893 Camp Springs, Kentucky Gender:	Re: Tergi's build threads Reply #14 - 05/29/17 at 15:01:31 Looks like I am not the only one having trouble with TinyPic. I can't get photos to load on their site either...the trouble started at the end of last week.
Back to top	Someday I will be old......But not today! IP Logged