stewmills
Serious Thumper
Offline
Imagination is more important than knowledge
Posts: 2641
Auburn, AL
Gender:
|
I do know that the two front bolts are M6 X 1 (1 being the thread pitch) and maybe 16mm long is the size I used. I'm not sure if the rear one is the same size. I want to think it is a bit smaller?
Best thing it to just take the bolts down to your local ACE Hardware if you have one and they will be able to match it up perfectly and have several different head types depending on what you want. If you don't have an ACE, HD and Lowes may have some selection in their bolt section but nowhere near as good as ACE. Of course a local nut and bolt supply store will have them, if there is one by you.
|