justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
After the other three are out , twist the bowl, loosening the last one. AFTER you've tried everything else, because that's probably gonna wreck the gasket. Getting the other three loose often relieves some tension on the last one.
If all else fails, a Dremel to slot the head for a screwdriver, If that's a bust, take the head off , flatten two sides of what's poking up, and get the vise grips after it. Don't forget about penetrating oil,
|