Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› bar clamp and riser setup
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
bar clamp and riser setup (Read 263 times)
norm92de
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1180
El Paso TX
Gender:
Re: bar clamp and riser setup
Reply #15 -
08/15/16 at 11:04:54
Tocsic,
The length of the risers could be a bit less but 3" works out fine with the stock controls without any problems, which might be the case if you make them much shorter.
Versy ought to put out a kit ready to go. No chasing around for bolts etc.
Back to top
2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic.
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: bar clamp and riser setup
Reply #16 -
08/15/16 at 11:50:51
Hey Norm, I didn't tell you, but I just sprayed those with WD-40 to prevent corrosion durring shipping. You should at least wax them.
Back to top
Versey's Place
Tech Section Index
IP Logged
norm92de
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1180
El Paso TX
Gender:
Re: bar clamp and riser setup
Reply #17 -
08/15/16 at 12:19:08
In El Paso corrosion is not on the cards.
Back to top
2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic.
IP Logged
zipidachimp
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1416
surrey, b.c.
Gender:
Re: bar clamp and riser setup
Reply #18 -
08/15/16 at 21:43:46
local fastenal is great for 200 at a time. no singles!
Back to top
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18099
Camp Springs, Kentucky
Gender:
Re: bar clamp and riser setup
Reply #19 -
08/16/16 at 04:37:14
zipidachimp wrote
on 08/15/16 at 21:43:46:
local fastenal is great for 200 at a time. no singles!
My local Fastenal is the same....the fasteners in stock are all in bags of 50 or more.
If you want smaller quantities they can order them and have them in a couple days - but.....they charge you shipping! I found it is actually cheaper, faster and more reliable to just go online to Fastenal and order the stuff online, and have it shipped to you. (The stainless allen screw carb sets I put together all came from Fastenal).
Back to top
Someday I will be old......But not today!
IP Logged
norm92de
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1180
El Paso TX
Gender:
Re: bar clamp and riser setup
Reply #20 -
08/30/16 at 12:00:02
FWIW,
I fitted a pair of 3" risers that Verslagen made for me. 'Temporarily' I used 6" 3/8 x16 bolts, 94 cents nuts and all, from Tractor Supply probably made of regurgitated toffee. Anyway, I haven't got around to fitting metric socket head bolts yet and I don't think I will. The cheapos' seem to be doing everything one needs. The local store wanted about $5.00 apiece for the metric article! Hex-head wasn't problem with tightening as I expected, they just torqued down normally.-sorry Cheapnewby-
Back to top
2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic.
IP Logged
ohiomoto
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2772
Re: bar clamp and riser setup
Reply #21 -
08/30/16 at 17:50:27
Don't be afraid to try Ace Hardware. There is one near my office that stocks a really nice selection of fasteners and metals.
Back to top
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/28/24 at 19:15:14
›
General Category
›
Rubber Side Down!
› bar clamp and riser setup
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.