Does anybody know of a source for handlebar risers. I would like a set of plain 1" diameter 3" long alloy risers. Anything shorter will probably give me tank clearance issues. I found some 2" long some time back but I can't remember where I found them.

There are plenty of risers out there but plain cylindrical types are not so easy to find.

Thanks.

Thanks Versy,

I can make some myself but as you say polishing is another matter.

I found some on the net that were finished in black or chrome. they were 2" long but for the life of me I can't remember the site. I really want something a bit longer to avoid tank/handlebar issues. I also of course want to use the stock handlebar clamps just changing the riser part. I don't want to cut the stock parts because they cost $130 apiece!

Using sockets is definitely an option but only as a last resort.

Norman.

I think I might have a set.
I will check in the morning.

UPDATE

None of the ones I have will work, they all require larger bolts and are 4" & 4.5" & 6".

Thanks for the replies Gentlemen,

All of the risers that I have found are for Hurleys. The mounting bolts are too big for our bikes. Also the spacing on a Hurley is different.

I don't know if a 3" plain spacer is made and a 2" will be too short.
I may have to resort to cutting the stock risers which are expensive to replace if I don't like the results. :'(

I'll never re-use mine. If you need them, ask!

Norm, Ron Ayers has the stock risers for the drag bars sold in 1995,the number is 56231-24B00 $65.16 for the pair I believe you can use your stock cap and nuts /cotter pins .(they're crome)