SuzukiSavage.com - Valve clearance, hot or cold engine?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Valve clearance, hot or cold engine?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Valve clearance, hot or cold engine? (Read 65 times)

Thomas Högberg Junior Member Offline SuzukiSavage.com Rocks! Posts: 61 Vårgårda, Sweden Gender:	Valve clearance, hot or cold engine? 07/21/16 at 10:43:24 Hi searched but not found, hot or cold engine when I set the valve clearance?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28887 L.A. California Gender:	Re: Valve clearance, hot or cold engine? Reply #1 - 07/21/16 at 10:55:09 Always done on a cold engine.
Back to top	Versey's Place Tech Section Index IP Logged

Thomas Högberg Junior Member Offline SuzukiSavage.com Rocks! Posts: 61 Vårgårda, Sweden Gender:	Re: Valve clearance, hot or cold engine? Reply #2 - 07/21/16 at 11:14:52 Thanks
Back to top	IP Logged

Armen

Serious Thumper

Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1452

Re: Valve clearance, hot or cold engine?
Reply #3 - 07/21/16 at 11:51:17

Back in the day, some cars listed both hot and cold clearance, as the mechanic would be driving the car into the shop and onto the lift.
Craziest was my '68 Opel Kadett. Valve clearance was listed/measured on the RUNNING engine. Factory tool to cover the cam sprocket so the oil wouldn't fly all over while adjusting the valves.
Not kidding Wink

In theory, theory and reality are the same. In reality, they aren't...

IP Logged

cheapnewb24 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1373 Virginia Gender:	Re: Valve clearance, hot or cold engine? Reply #4 - 07/21/16 at 16:04:52 I'd think it would be hard to check a hot engine. You'd be constantly burning yourself on pretty much everything. That doesn't include the race to get it apart while it's still hot. Any engineer who designed one that way should be beaten with a stick.
Back to top	2004 Suzuki Savage, Riding since fall 2015. IP Logged

Kris01 Serious Thumper Offline Eat, sleep, RIDE! Posts: 3767 Tennessee Gender:	Re: Valve clearance, hot or cold engine? Reply #5 - 07/21/16 at 18:12:59 How many 9 fingered mechanics worked on your Opel? Valve clearance lessens on a hot engine, correct? We want 0.003-0.005" clearance, correct?
Back to top	There's no problem that a full tank of gas and a sunny day can't fix! 2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor IP Logged

Ruttly Serious Thumper Offline Thumpers Rule Posts: 5112 Manteca , CA Gender:	Re: Valve clearance, hot or cold engine? Reply #6 - 07/21/16 at 20:37:37 Yes adjust them cold I had a ford falcon six cylinder that you had to adjust the valves hot and running , what a challenge , very accurate to loose it clattered too tight you couldn't get your feeler gauge out
Back to top	The Topic Terminator IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home