SuzukiSavage.com - Ryca CS-1 Sidestand Bracket dimensions? Anyone?

trevorw YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 26	Ryca CS-1 Sidestand Bracket dimensions? Anyone? 07/16/16 at 18:17:09 Hello!! I am pretty much at the end of my build and the one thing doging me is the cs-1 sidestand bracket, if any Ryca cs1 kit owners out there have some spare time and would not mind snapping a few pics of theirs and letting me know the measurements it would be greatly appreciated! Thanks again thumpers!!
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18137
Camp Springs, Kentucky
Gender: male

Re: Ryca CS-1 Sidestand Bracket dimensions? Anyone
Reply #1 - 07/17/16 at 07:18:42

The RYCA kick stand mount would be a difficult piece to make....it has quite a bit of machining on it, and it also has a flat piece that crosses over to the opposite side under the engine to add stability.

I can take a picture of it mounted on my bike - but measuring and drawing the darn thing up would take a very long time.......and I went ahead and bought their mount, as I don't have a milling machine.

Back to top

Someday I will be old......But not today!

IP Logged

trevorw

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 26

Re: Ryca CS-1 Sidestand Bracket dimensions? Anyone
Reply #2 - 07/17/16 at 08:43:06

Thank you that would be awesome!
I was just going to make up a cad drawing and send it to my guy.
I got laid off in May and just can not justify spending $300, which for me after exchange and shipping would prob be close to $500, I managed to make pretty much everything myself so far including the rearset bracket but I know what you mean about this one being tricky!
Thanks again

Back to top

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18137
Camp Springs, Kentucky
Gender: male

Re: Ryca CS-1 Sidestand Bracket dimensions? Anyone
Reply #3 - 07/18/16 at 10:22:22

My bracket is already on the bike. The RYCA site has photos that are probably better than I can do with my crappy camera or phone.

http://shop.rycamotors.com/sidestand_mount.html

This strap goes onto the sidestand mount, and then bolts to the other side of the frame to help stabilize the mount and transfer some of the load.

http://shop.rycamotors.com/sidestand_strap.html

I bought RYCA's mount, and made my own strap as shown here.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1358099938/30

Back to top

Someday I will be old......But not today!

IP Logged

trevorw

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 26

Re: Ryca CS-1 Sidestand Bracket dimensions? Anyone
Reply #4 - 07/24/16 at 12:04:48

Awesome thanks!

Dave wrote on 07/18/16 at 10:22:22:

My bracket is already on the bike. The RYCA site has photos that are probably better than I can do with my crappy camera or phone.

http://shop.rycamotors.com/sidestand_mount.html

This strap goes onto the sidestand mount, and then bolts to the other side of the frame to help stabilize the mount and transfer some of the load.

http://shop.rycamotors.com/sidestand_strap.html

I bought RYCA's mount, and made my own strap as shown here.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1358099938/30

Back to top

IP Logged