SuzukiSavage.com - wheel bearings

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › wheel bearings

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

wheel bearings (Read 47 times)

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2630 Auburn, AL Gender:	wheel bearings 01/26/16 at 20:31:43 are our wheel bearings "sealed"? i have removed and reinstalled my front and rear several times and just got to thinking that i clean and lube the axle and bearing outsides but never the innards like i do repacking traditional bearings on my utility trailer hubs, etc.
Back to top	2008 \| 152/52.5–Air Mix 3/4 \| RT6 w/Redline \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28780 L.A. California Gender:	Re: wheel bearings Reply #1 - 01/26/16 at 20:45:51 The stock ones are sealed on the out side but not the inside.
Back to top	Versey's Place Tech Section Index IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2630 Auburn, AL Gender:	Re: wheel bearings Reply #2 - 01/26/16 at 20:59:50 gotcha. i have never taken the bearings out of the hub, so i just wiped away any dirt or grime, slapped grease on the visible exposed areas, and bolted it back up. 5500 miles, garage kept, kept clean so prob nothing to be concerned about, right?
Back to top	2008 \| 152/52.5–Air Mix 3/4 \| RT6 w/Redline \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: wheel bearings Reply #3 - 01/26/16 at 21:02:12 Don't aim the car wash wand at them.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2630 Auburn, AL Gender:	Re: wheel bearings Reply #4 - 01/26/16 at 21:09:07 i only use the water hose on a light stream maybe twice a year to wash the bike. never a pressure washer.
Back to top	2008 \| 152/52.5–Air Mix 3/4 \| RT6 w/Redline \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

gizzo Serious Thumper Offline SuzukiCabbage. It's Savage. Posts: 1318 Australia	Re: wheel bearings Reply #5 - 01/27/16 at 04:47:28 When you do go to change them you can buy a generic sealed bearing from the bearing store, no need to buy genuine. I don't recall the number but it's a really common one, 6303 or something about $7 ea here so probs $2.50 for you guys.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home