SuzukiSavage.com - Blet / bolt head interference

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Blet / bolt head interference

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Blet / bolt head interference (Read 37 times)

swing69

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 214
Central Joisey
Gender: male

Blet / bolt head interference
05/22/15 at 09:37:49

on a ryca cs-1, 2006 s40 bike;

one small bolt head rubs the belt, just behind and below the drive belt front pulley. That goes into the engine / transmission. This is with the swingarm hanging at full extension.

When I rotate the wheel, I can hear a slight rubbing. I'm sure with weight on the wheel, it will miss.

but did anyone else find this to be the case?

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18098 Camp Springs, Kentucky Gender:	Re: Blet / bolt head interference Reply #1 - 05/22/15 at 09:51:54 Yes, I put on a bolt with a flatter allen head drive. It is crappy photo - but it is the only one I have that shows it. The shiny bolt at the bottom of the photo...on the aluminum cover over the shift linkage.
Back to top	Someday I will be old......But not today! IP Logged

swing69 Full Member Offline SuzukiSavage.com Rocks! Posts: 214 Central Joisey Gender:	Re: Blet / bolt head interference Reply #2 - 05/22/15 at 11:10:37 yupper...that's it. I removed it, ground it rounded the head, leaving just enough to get it out. When I find time, I'll replace it with the allen / button head style you have.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home