Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Belt Drive Guard Issue? (Read 113 times)
ihasabike
Full Member
***
Offline

^^ihasapicofit!

Posts: 121

Belt Drive Guard Issue?
04/26/15 at 18:37:24
 
I hit a pothole today pretty hard and then there was a scraping noise at the rear tire, so I stopped.  The guard over the belt drive was scraping the metal belt gear on one side.  I couldn't figure out how it got bent sideways but I tried to bend it back with pliers.  No luck.  After a while I thought maybe it was originally in a higher position, and that the rear wheel got pushed upward so that the metal belt gear got pushed up into the belt guard so that it engaged with it and pulled it down when it returned to normal position.  So I pulled up on the belt guard and it made a popping noise and went up into a higher position so that it was no longer engaged with the metal belt gear.  Then I was able to drive about 50 miles with no issues.

Firstly, did I get it right?

Secondly, do I need to get someone who knows what they are doing to look it over, or should I feel confident that everything is fine?
Back to top
 
 

K/N Filter; Tachometer; Raptor Petcock; Engine Guard; Highway Pegs; Windshield; GT Grips; Shot Filled Dragbars; Saddle Bags and Supports; 12V Outlet
  IP Logged
Kris01
Serious Thumper
*****
Offline

Eat, sleep, RIDE!

Posts: 3767
Tennessee
Gender: male
Re: Belt Drive Guard Issue?
Reply #1 - 04/26/15 at 18:39:55
 
As long as it doesn't rub, I wouldn't worry about it. I'd check it though to make sure it doesn't happen again.
Back to top
 
 

There's no problem that a full tank of gas and a sunny day can't fix!

2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male
Re: Belt Drive Guard Issue?
Reply #2 - 04/26/15 at 18:48:47
 
if it moved, and you popped it back into position...
you're missing a few bolts.
Back to top
 
 
WWW   IP Logged
Yoshi
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 874
LongIsland, N.Y.
Gender: male
Re: Belt Drive Guard Issue?
Reply #3 - 04/26/15 at 19:02:15
 
The upper belt guard is mounted in 3 spots
1. Bottom bolt of rear shock
2. Midway of the belt cover mounted to the rear swing arm
3. Behind the sprocket guard

Make sure all 3 mounts are secure and keep the rubber side down 😉
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Belt Drive Guard Issue?
Reply #4 - 04/26/15 at 21:22:32
 
It happened. You haven't done anything but move a piece that Clearly is not secured. Dude, that sounds So Uncool.  You gotta figure that out and get it secured.
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
jcstokes
Serious Thumper
*****
Offline

SuzukiSavage.com is
very useful

Posts: 2119
Mauku New Zealand
Gender: male
Re: Belt Drive Guard Issue?
Reply #5 - 04/26/15 at 21:50:21
 
The bracket near the rear shock can break but will still sort of clamp, I think there should be a full hole in the belt guard at this point, not a half  round.
Back to top
 
 

Completely stock 2010 S40, aftermarket rev counter and back pack, Airhawk seat pad
  IP Logged
Drestakil
Full Member
***
Offline

innocent bystander

Posts: 178
Southern Illinois
Gender: male
Re: Belt Drive Guard Issue?
Reply #6 - 04/29/15 at 19:21:26
 
I had a problem with the saddlebag supports hitting the belt guard and bending it against the rear pulley. Had to take it off to straighten it the put longer shocks on to keep it from happening again.
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Belt Drive Guard Issue?
Reply #7 - 04/29/15 at 20:06:09
 
Nothing
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
Happybandit
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 24

Re: Belt Drive Guard Issue?
Reply #8 - 05/01/15 at 16:14:08
 
Where was the bend located at?
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/28/24 at 01:18:15



General CategoryRubber Side Down! › Belt Drive Guard Issue?


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.