SuzukiSavage.com - inside of me-wires

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › inside of me-wires

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

inside of me-wires (Read 94 times)

wambr Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 610 Russia, Samara Gender:	inside of me-wires 02/22/15 at 09:01:02 winter tired with your monotony and my mind began to Wake up crazy ideas... one of them was hidden wire management inside back horns. and the question in General, how might it look like? how it will be neater look like? and ideally, skip the wiring harness inside risers ... anyone have pictures? show me please tnx guys!
Back to top	Yeah, it's not bigtwin, but it is the best half of it IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28633 Tucson Az Gender:	Re: inside of me-wires Reply #1 - 02/22/15 at 09:22:56 I think Dave hid his handlebar wiring inside the bars...
Back to top	Ludicrous Speed !... ... ... IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18094 Camp Springs, Kentucky Gender:	Re: inside of me-wires Reply #2 - 02/22/15 at 12:40:21 No....mine come out of the controls on the bottom and go along the bottom of the bars just like a normal bike. You can't see them while you are riding - works for me!
Back to top	Someday I will be old......But not today! IP Logged

Steve H Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1223 Spartanburg, SC Gender:	Re: inside of me-wires Reply #3 - 02/23/15 at 04:11:58 If you have the stock handlebars, the welded in weights might be in the way and you won't be able to put the wires inside. Many Harley handlebars are already drilled for inside wiring. The connectors will be very hard to get through the handlebars.
Back to top	87 LS650, 2005 Ninja 250, 2009 Yamaha C3, 2001 Honda Reflex. On 2 wheels since 6/80. IP Logged

wambr Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 610 Russia, Samara Gender:	Re: inside of me-wires Reply #4 - 02/23/15 at 08:24:15 thanks guys! so far my thoughts are:I have a back horn from Ural-wolf, I can extend the wires through the steering pipe. I have now another question has arisen: the weight of the sinkers in the horns?
Back to top	Yeah, it's not bigtwin, but it is the best half of it IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18094
Camp Springs, Kentucky
Gender: male

Re: inside of me-wires
Reply #5 - 02/23/15 at 08:36:54

I guess the only way to figure that out would be to weigh a stock set of bars, and a similar set of hollow bars.

Since the stock bars have rubber cushioned mounts at the top yoke - the purpose of the weights is to provide "mass" to resist the vibrations from transferring out of the rubber cushions. Make the bars lighter - and more vibrations will be felt. "IF" the factory was really high tech about it....I supposed they could have deliberately sized the weight to focus on a particular rpm range.

I don't know that it is a big deal - as my Cafe bars are mounted solid to the fork tubes and I really don't notice any uncomfortable vibrations.

Someday I will be old......But not today!

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home