SuzukiSavage.com - Screw size on top of battery guard...?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Screw size on top of battery guard...?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Screw size on top of battery guard...? (Read 40 times)

SaraPeg

YaBB Newbies

Offline

Posts: 9
Thompson Falls, Montana
Gender: female

Screw size on top of battery guard...?
10/16/14 at 10:59:20

Hey everyone,

I was wondering if anyone knew the specs for the screw that's located at the top of the battery guard....on the positive side of the battery...the one that holds the piece in place that makes up the back of the toolbox.

I hope that makes sense..haha.

If more info is needed, like bike year or anything, just let me know...and thanks in advance for any help!

-Sara

Let freedom ring.

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18099
Camp Springs, Kentucky
Gender: male

Re: Screw size on top of battery guard...?
Reply #1 - 10/16/14 at 12:28:51

The black metal part that hold the battery in, is held on by flat bottomed screws that also hold the latch for the tool box cover. Those would both be 6x1.0 bolts about 10mm long.

The chrome cover on top is held on by screw that has a tapered bottom, and that also would be a 6x1.0, and might be pretty short....something like 5 or 6mm long.

http://www.hondaofflorence.com/fiche_section_detail.asp?section=432144&catego...

Someday I will be old......But not today!

IP Logged

SaraPeg YaBB Newbies Offline Posts: 9 Thompson Falls, Montana Gender:	Re: Screw size on top of battery guard...? Reply #2 - 10/16/14 at 12:55:47 Thanks so much, Dave!
Back to top	Let freedom ring. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home