SuzukiSavage.com - Snap ring pliers

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Cafe › Snap ring pliers

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Snap ring pliers (Read 56 times)

rl153 Serious Thumper Offline S40 Just right! Posts: 906 Bloomfield,CT Gender:	Snap ring pliers 10/08/14 at 17:07:05 Is there a snap ring pliers used in the cam tensioner replacement operation? I'm curious because I had to by a 90 degree snap ring pliers for a household job and I was wondering if I could also use it on the bike? thanks.
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: Snap ring pliers Reply #1 - 10/08/14 at 17:17:58 It's a very tiny snap ring... I think I used a paper clip and my thumb... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Snap ring pliers Reply #2 - 10/08/14 at 17:21:38 Yeah, the tensioner is held on the shaft by one. I don't know if you are going to be able to get a 90 on it.. You need pliers that open the snap ring. It's an outside diameter ring.It's not impossible to get by without the pliers.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

rl153 Serious Thumper Offline S40 Just right! Posts: 906 Bloomfield,CT Gender:	Re: Snap ring pliers Reply #3 - 10/08/14 at 18:30:00 I don't know much about snap ring pliers, but these are 6 inches .are the holes in the tensioner snap ring real tiny?Thanks for your answers.
Back to top	IP Logged

MnSpring Serious Thumper Offline Younger than most people my age. Posts: 9345 Minn Gender:	Re: Snap ring pliers Reply #4 - 10/08/14 at 19:18:18 Try your 90 one. If that don't work. Try sharp nails, if that don't work, try two dental picks, if that don't work, try two paper clips. If non of them work, just buy a new one, and rip off the old one with any old pliers !
Back to top	Ben Franklin once said: "If you give up a freedom, for the sake of security, you will have neither". Which is *More TRUE, today, than yesterday.('06, S-40, Stock) well, mostly* . IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Snap ring pliers Reply #5 - 10/08/14 at 20:53:05 I use a 90, the ring is so small it doesn't have holes it has notches. if you have several screwdrivers, chances are you can shove one in the notches and spread it apart enough to get it off.
Back to top	Versey's Place Tech Section Index IP Logged

thumperclone Serious Thumper Alliance Member Offline PGR rider riding with respect Posts: 6067 Grand Junction Colorado Gender:	Re: Snap ring pliers Reply #6 - 10/08/14 at 21:36:26 mine came with 3 different sizes
Back to top	standing for those who stood for US IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Snap ring pliers Reply #7 - 10/09/14 at 11:46:09 A real pointy set of needle nose mite get it. Beware the "Jesus Clip" moment.. Its Aaaaalmost off,, Aaaaalmost in your hand,, SPROING!!! JEEZUS! Where did it GO?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home