SuzukiSavage.com - torn gasket

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › torn gasket

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

torn gasket (Read 58 times)

Jsud04

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 223

torn gasket
09/09/14 at 16:27:29

I searched but I didn't find anything on this topic so I was wondering.. Today while I was working on getting my piston in the jug my gasket got stuck to my hand and tore once in front of one of the little studs on the cam chain side and then another spot near the cam chain at the front of the jug I mended both spots with gasket maker on the top and bottom and put it together and let it sit overnight without any pressure on it is this okay is this okay. Could I just use gasket maker where the jug and case meet?

1986 red, raptor petcock, cham chain tensioner mod,carb plug pulled. DIY highway pegs, DIY ammo can storage...

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18099 Camp Springs, Kentucky Gender:	Re: torn gasket Reply #1 - 09/10/14 at 05:46:26 I would have put a dab of sealer at each tear, then tightened the jug to the case to clamp it all together flat. I put a small dab of sealer on top the case at the center seam......just to make sure it is sealed.
Back to top	Someday I will be old......But not today! IP Logged

Jsud04 Full Member Offline SuzukiSavage.com Rocks! Posts: 223	Re: torn gasket Reply #2 - 09/10/14 at 10:43:18 Cool.
Back to top	1986 red, raptor petcock, cham chain tensioner mod,carb plug pulled. DIY highway pegs, DIY ammo can storage... IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home