mountainmad
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 3
|
Hi all. I have a 1996 Suzuki Savage LS650. I recently moved to SoCal and transported the bike, so I had to drain out all the oil and gas. It sat for about 2 months after I drained the bike.
I just put in 2qt of 10W-40 while the engine was cold (there wasn't any oil in the bike, so I didn't want to run it), but there is no oil visible when I looked through the glass.
I thought maybe I needed to run the bike for a couple of minutes to let the oil circulate, so I warmed it up. When it was running, I could see oil moving (spurting might be the right word) through the window. After I turned the bike off and let it sit for a little while, the oil level still showed 0 even though I had just put 2qts of oil in the bike.
I'm going to do another oil change (drain and filter change) and see if that helps.
Any ideas what could be wrong? Could there a clog somewhere? Can I put an additive in the oil to break it up or something?
|