SuzukiSavage.com - exhaust kaput

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › exhaust kaput

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

exhaust kaput (Read 76 times)

Steddy58

Full Member

Offline

Ooops I did it again

Posts: 240
Liverpool UK
Gender: male

exhaust kaput
07/26/14 at 09:49:22

hi, my exhaust has given up on me, the outer pipe has become detached from the inner pipe at the top of the header ( rusted through ) I'm pretty sure its too far gone to weld. I'm going to ask some questions now and they will probably be pretty stupid, 1) What purpose does the outer tube serve? 2) can I take a silencer from the inner pipe? 3) I'm thinking of maybe having a high rise sporty type pipe is this feasible? 4) is there any other bike pipe I can use with the same bore or is it a new savage pipe with the inner and outer tube?, many thanks

1988 sav, mikuni vm36 carb (lancer),high comp piston, racing cam, raptor petcock, self-made exhaust, delkevic silencer (ryca header), K&N air filter, 48,000 miles

IP Logged

verslagen1 YaBB Moderator ModSquad Online Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: exhaust kaput Reply #1 - 07/26/14 at 10:41:19 1it's pretty 2there isn't a silencer in the header, but why would you want to bother with a rusty old pipe? 3yes... rycamotors.com 4no... savage or custom header. raask is one. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1406164740
Back to top	Versey's Place Tech Section Index IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28635
Tucson Az
Gender: male

Re: exhaust kaput
Reply #2 - 07/26/14 at 11:01:12

Seeing as you are in the UK, and shipping cross pond would cost you a house payment,... I would look for a local muffler shop that feels like a challenge...
Have them weld you up a new one going any shape you like... (single wall)...
..(the outer pipe also gives some heat shielding protection)... but you can fashion up heat shields in needed places and clamp them in place with hose clamps...

If I were in soggy England,.. I'd have one made with stainless steel...

Ludicrous Speed !... ... Huh

...

IP Logged

Steddy58 Full Member Offline Ooops I did it again Posts: 240 Liverpool UK Gender:	Re: exhaust kaput Reply #3 - 07/26/14 at 11:46:35 Yeah looking at the rust bucket that used to be my exhaust stainless is where I'm heading, if it was single skin would it need to be the size of the inner pipe or outer pipe
Back to top	1988 sav, mikuni vm36 carb (lancer),high comp piston, racing cam, raptor petcock, self-made exhaust, delkevic silencer (ryca header), K&N air filter, 48,000 miles IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28635 Tucson Az Gender:	Re: exhaust kaput Reply #4 - 07/26/14 at 12:22:45 Inner,...
Back to top	Ludicrous Speed !... ... ... IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18095 Camp Springs, Kentucky Gender:	Re: exhaust kaput Reply #5 - 07/26/14 at 13:12:52 Serowbot wrote on 07/26/14 at 12:22:45: Inner,... Or.....inner plus a little bit. No bigger than 1.5" diameter, or it will not run as well.
Back to top	Someday I will be old......But not today! IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: exhaust kaput Reply #6 - 07/26/14 at 15:29:48 Take note of the ring facing into the pipe. It's there to control reflected pulses. How important it is I don't know.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home