Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
reving motor in neutral (Read 75 times)
snick
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 35
Illinois
Gender: male
reving motor in neutral
07/03/14 at 12:38:44
 
I rev my motor in neutral and it shuts off can someone direct me to a tech I didnt see one im rejetting
Back to top
 
 
  IP Logged
snick
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 35
Illinois
Gender: male
Re: reving motor in neutral
Reply #1 - 07/03/14 at 12:56:14
 
I think i might be too rich on pilot jet 150 main 55 pilot even 52.5 pilot 0.61 spacer im gonna try 50 pilot little less on spacer
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male
Re: reving motor in neutral
Reply #2 - 07/03/14 at 13:17:04
 
If you shaved the white spacer to .61mm and it's too rich, you probably shaved it too thin.
Try .9mm

and up your idle speed.
Back to top
 
 
WWW   IP Logged
snick
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 35
Illinois
Gender: male
Re: reving motor in neutral
Reply #3 - 07/03/14 at 13:30:18
 
Ok will try
Back to top
 
 
  IP Logged
Tocsik
Serious Thumper
*****
Offline

the singularity

Posts: 1163
Denver, CO
Gender: male
Re: reving motor in neutral
Reply #4 - 07/03/14 at 13:39:48
 
What's your altitude?
Back to top
 
 

'08|Raptor|Dyna|Stock jets & no other carb changes @ 5280' alt|'slavy CCT|Kawa front pulley|130/90 rear tire|7" LED headlight|3" straight risers|FIAMM El Grande horns|Mutazu hard bags
  IP Logged
snick
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 35
Illinois
Gender: male
Re: reving motor in neutral
Reply #5 - 07/03/14 at 13:53:47
 
It is actually 0.061" i didnt measure @ mm
Back to top
 
 
  IP Logged
snick
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 35
Illinois
Gender: male
Re: reving motor in neutral
Reply #6 - 07/03/14 at 13:57:34
 
I'm in Illinois so my altitude is about 583
Back to top
 
 
  IP Logged
Kris01
Serious Thumper
*****
Offline

Eat, sleep, RIDE!

Posts: 3767
Tennessee
Gender: male
Re: reving motor in neutral
Reply #7 - 07/03/14 at 14:12:50
 
So why are you revving it in neutral?
Back to top
 
 

There's no problem that a full tank of gas and a sunny day can't fix!

2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male
Re: reving motor in neutral
Reply #8 - 07/03/14 at 14:12:52
 
snick wrote on 07/03/14 at 13:53:47:
It is actually 0.061" i didnt measure @ mm

actually, I made a mistake (threw off by the missing zero), I meant .09"
so add a washer   Smiley
Back to top
 
 
WWW   IP Logged
snick
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 35
Illinois
Gender: male
Re: reving motor in neutral
Reply #9 - 07/03/14 at 15:21:38
 
Ok so i put a 50 pilot went about 1/12 mix screw n brought my idle up more it doesnt want to die in neutral ive yet to ride thanks on the idle screw suggestion it worked
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/28/24 at 14:27:50



General CategoryRubber Side Down! › reving motor in neutral


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.