SuzukiSavage.com - reving motor in neutral

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › reving motor in neutral

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

reving motor in neutral (Read 75 times)

snick YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 35 Illinois Gender:	reving motor in neutral 07/03/14 at 12:38:44 I rev my motor in neutral and it shuts off can someone direct me to a tech I didnt see one im rejetting
Back to top	IP Logged

snick YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 35 Illinois Gender:	Re: reving motor in neutral Reply #1 - 07/03/14 at 12:56:14 I think i might be too rich on pilot jet 150 main 55 pilot even 52.5 pilot 0.61 spacer im gonna try 50 pilot little less on spacer
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: reving motor in neutral Reply #2 - 07/03/14 at 13:17:04 If you shaved the white spacer to .61mm and it's too rich, you probably shaved it too thin. Try .9mm and up your idle speed.
Back to top	Versey's Place Tech Section Index IP Logged

snick YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 35 Illinois Gender:	Re: reving motor in neutral Reply #3 - 07/03/14 at 13:30:18 Ok will try
Back to top	IP Logged

Tocsik Serious Thumper Offline the singularity Posts: 1176 Denver, CO Gender:	Re: reving motor in neutral Reply #4 - 07/03/14 at 13:39:48 What's your altitude?
Back to top	'08\|Raptor\|Dyna\|Stock jets & no other carb changes @ 5280' alt\|'slavy CCT\|Kawa front pulley\|130/90 rear tire\|7" LED headlight\|3" straight risers\|FIAMM El Grande horns\|Mutazu hard bags IP Logged

snick YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 35 Illinois Gender:	Re: reving motor in neutral Reply #5 - 07/03/14 at 13:53:47 It is actually 0.061" i didnt measure @ mm
Back to top	IP Logged

snick YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 35 Illinois Gender:	Re: reving motor in neutral Reply #6 - 07/03/14 at 13:57:34 I'm in Illinois so my altitude is about 583
Back to top	IP Logged

Kris01 Serious Thumper Offline Eat, sleep, RIDE! Posts: 3767 Tennessee Gender:	Re: reving motor in neutral Reply #7 - 07/03/14 at 14:12:50 So why are you revving it in neutral?
Back to top	There's no problem that a full tank of gas and a sunny day can't fix! 2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: reving motor in neutral Reply #8 - 07/03/14 at 14:12:52 snick wrote on 07/03/14 at 13:53:47: It is actually 0.061" i didnt measure @ mm actually, I made a mistake (threw off by the missing zero), I meant .09" so add a washer
Back to top	Versey's Place Tech Section Index IP Logged

snick YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 35 Illinois Gender:	Re: reving motor in neutral Reply #9 - 07/03/14 at 15:21:38 Ok so i put a 50 pilot went about 1/12 mix screw n brought my idle up more it doesnt want to die in neutral ive yet to ride thanks on the idle screw suggestion it worked
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home