SuzukiSavage.com - Top triple clamp

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Top triple clamp

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Top triple clamp (Read 75 times)

Spamy

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 224

Top triple clamp
06/11/14 at 07:33:17

Anyone got a source for top triple clamps?

Im doing a refresh on the bike and want to clean up the top triple. Tired of the old holes being there for the clamps.

I remember someone had been plugging the holes, and that might be a viable solution. I just want it cleaned up.

Will probably paint or powdercoat it black also.

I have a chrome and a billet stock ones currently to mod if needed.

IP Logged

Gerry

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 121
Southwest Michigan
Gender: male

Re: Top triple clamp
Reply #1 - 06/11/14 at 08:54:28

There is this build...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304297812/15
He did a pretty good job of filling in the handle bar stem mount holes.

And then there is the Dave Seidmen build that is covered in the Ryca builders gallery...
http://rycamotors.com/customer_builds/ryca_customer_dseidman.html
He machined out his top clamp between the webbing.

I kind of stole his idea and made my own top clamp...

I could make another one, don't know what I would charge though.

Gerry

This message was posted using Google Chrome on a system using Linux Mint 17 Mate

IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: Top triple clamp Reply #2 - 06/11/14 at 09:01:57 Holes make yer' bike go faster... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

scubachef

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 140

Re: Top triple clamp
Reply #3 - 06/12/14 at 07:48:13

The plugged and machined top triple can be found in Aaron's thread below. He used to offer I as a service at 125.00 I think.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304297812/0

I smoothed mine using more budget minded means since I don't have a mill. You can see it on page 3 of my thread below. Not too difficult and didn't really take long.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1323576217/0

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home