SuzukiSavage.com - Anyone using Ryca Superbars on a stock savage?

Fishbulb

Ex Member

Anyone using Ryca Superbars on a stock savage?
05/06/14 at 07:59:32

Looking to change the buckhorns to something like the Ryca Superbar:

http://shop.rycamotors.com/superbars.html

Ryca said they should fit no problem, but have not put them on a stock bike.

Has anyone here done that? Or can comment on the quality of the Superbar? I Was going to look for a set of HD bars, but if these are good for $30 I will just get them.

Thank you!

Jac

Back to top

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Anyone using Ryca Superbars on a stock savage? Reply #1 - 05/06/14 at 08:05:47 1" inch diameter, 30" total length. Chrome Diameter is right, before I jumped, tho, Id take a tape measure & go look at exactly where the mirrors will land. How big you are & where they land will play a major factor in how happy youll be,
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: Anyone using Ryca Superbars on a stock savage?
Reply #2 - 05/06/14 at 09:01:33

Look like the bars I have on the '96 with risers.
30" is a good width for the average 6'
wide enough so the mirrors will see something besides elbow.

If you have a stock tank, you will need risers.
if you look at the fische, you'll see that a bolt run thru the clamp and the top triple tree. get a longer bolt and a set of deep sockets (see tech section) and you're in business.

Back to top

Versey's Place
Tech Section Index

IP Logged

Fishbulb Ex Member	Re: Anyone using Ryca Superbars on a stock savage? Reply #3 - 05/07/14 at 05:06:21 Thanks guys! I am 6' and of average build. I'll take a look with the tape measure and see where I end up.
Back to top	IP Logged

Kenny G Serious Thumper Offline SuzukiSavage.com The Singles Club...LOL Posts: 1754 Robson Ranch, Denton, Texas Gender:	Re: Anyone using Ryca Superbars on a stock savage? Reply #4 - 12/03/14 at 20:40:44 I have 7/8" SuperBars on my Blast and love them. I did have to add some additional height to the risers to have the controls clear the tank. Kenny G
Back to top	IP Logged

Demin Serious Thumper Offline We need more chlorine in the gene pool Posts: 2435 Warren,Ohio Gender:	Re: Anyone using Ryca Superbars on a stock savage? Reply #5 - 12/04/14 at 05:07:30 I have a set of the HD bars on mine with stock risers.Very close to the tank,but they clear.
Back to top	Next project:finish '87 Savage custom/bobber/CHOP STYLE***DONE finish '77 Yamaha XS650 bobber Bought another one finish'79 Harley custom bobber(NEXT) IP Logged

braveteacher Full Member Offline SuzukiSavage.com Rocks! Posts: 154	Re: Anyone using Ryca Superbars on a stock savage? Reply #6 - 12/15/14 at 12:27:12 Not stock bike...but just installed some super bars from Ryca last night...I had Ryca cafe bar on but they were super uncomfortable for me...so switched them out and I am very happy.
Back to top	IP Logged

zipidachimp Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1411 surrey, b.c. Gender:	Re: Anyone using Ryca Superbars on a stock savage? Reply #7 - 12/15/14 at 12:34:11 Whoa nellie!!!! How'd you get that benelli tank to fit????? Your bike looks too cool! Never mind, just spotted your build story, thanks.
Back to top	IP Logged

SavageCat Junior Member Offline SuzukiSavage.com Rocks! Posts: 96 Central VA	Re: Anyone using Ryca Superbars on a stock savage? Reply #8 - 12/18/14 at 06:22:42 FWIW. Used lower height sockets for my risers, I just like the look better. And to avoid damage to the tank (because stuff does hit it), I glued those rubber picture bumpers to whatever places hit the tank. Been that way for over a year now, and no issues or scratches.
Back to top	IP Logged

braveteacher Full Member Offline SuzukiSavage.com Rocks! Posts: 154	Re: Anyone using Ryca Superbars on a stock savage? Reply #9 - 12/24/14 at 15:55:27 Today's ride with superbars
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Anyone using Ryca Superbars on a stock savage? Reply #10 - 12/27/14 at 10:01:31 What do you teach? Boxing? I have seen Braveteacher,,, and thought, Isn't that redundant? Isn't bravery just Part of being a teacher? But the arms look like they could be attached to a pretty stout dude, so, why the name? You brave cuz you ride or cuz you're a teacher, er whut?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

dustystranger

Junior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 53

Re: Anyone using Ryca Superbars on a stock savage?
Reply #11 - 12/27/14 at 14:42:32

If these ryca bars are the same as the ones you can buy on amazon, they will fit. But if you have a vista cruise control they will be too short. I added about 1" of old broom handle and things are fine. I have another savage with sportster bars. These have a little more pull back and a little more rise. No need for broom handle extensions. If you can get a set of sportster bars that would be my chioice. But it all depends on your size, type of seat, footpeg location. Look, if you want something to fit YOU, then you are going to be buying several types of bars until you get what is just right for you. I am 6ft 2" and my savage fits me perfectly. It did not come that way from the factory! It will take some time and money. If you have both you can turn a coffee table into a road racer. Rick Seiman said that 40 yrs ago. It still makes me chuckle.

Back to top

IP Logged

braveteacher Full Member Offline SuzukiSavage.com Rocks! Posts: 154	Re: Anyone using Ryca Superbars on a stock savage? Reply #12 - 12/31/14 at 20:15:53 justin_o_guy2...I am a teacher at Boone High School in Orando...the mascot is a Brave "indian" so years ago I chose my email to be Braveteacher@gmail.com...that is where braveteacher comes from.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Anyone using Ryca Superbars on a stock savage? Reply #13 - 12/31/14 at 20:51:54 Cool..
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Albert Verdugo

Junior Member

Offline

Riding is freedom!

Posts: 91
Baja California
Gender: male

Re: Anyone using Ryca Superbars on a stock savage?
Reply #14 - 01/03/15 at 18:19:05

braveteacher wrote on 12/15/14 at 12:27:12:

Not stock bike...but just installed some super bars from Ryca last night...I had Ryca cafe bar on but they were super uncomfortable for me...so switched them out and I am very happy.

https://lh3.googleusercontent.com/-XEuPxVM9uMg/VI9Dvx5NJqI/AAAAAAAABxs/yCF3tT...

https://lh4.googleusercontent.com/-c8WSEpNa7CM/VI9Dv5HsnyI/AAAAAAAABxw/CgfsWx...

https://lh6.googleusercontent.com/-BZkRoxn39FE/VI9Dv34CVCI/AAAAAAAABxo/xSngUY...

https://lh4.googleusercontent.com/-gN4C_R_mSSY/VI9DzQWaCNI/AAAAAAAABx8/_SUoCQ...

https://lh6.googleusercontent.com/-7Mq-fxMjlW8/VI9Dza2w85I/AAAAAAAAByA/ZJeGx7...

What about the risers? did you use the stock ones?

Back to top

IP Logged