SuzukiSavage.com - Repositioning rectifier, any ideas?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Repositioning rectifier, any ideas?

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1 2

Repositioning rectifier, any ideas? (Read 234 times)

TheProduct2007 Junior Member Offline SuzukiSavage.com Rocks! Posts: 90	Re: Repositioning rectifier, any ideas? Reply #15 - 09/26/13 at 06:45:22 Handlebars, 25 in it doesn't seem as though it has enough clearance so I'm looking for some risers, I only need about 1-2 in more room
Back to top	image_117.jpg I'm going to ride whether I have to push this bike or not! IP Logged

TheProduct2007 Junior Member Offline SuzukiSavage.com Rocks! Posts: 90	Re: Repositioning rectifier, any ideas? Reply #16 - 09/26/13 at 06:47:36 I did a quick reupholster with the seat, marine grade vinyl alligator faux, looks like a woman's purse but it's just temporary. You may see how far the oil is reaching back on this pic it goes from the engine to the belt cover
Back to top	image_118.jpg I'm going to ride whether I have to push this bike or not! IP Logged

TheProduct2007 Junior Member Offline SuzukiSavage.com Rocks! Posts: 90	Re: Repositioning rectifier, any ideas? Reply #17 - 09/26/13 at 06:50:57 As you can see here I have bad oil leak it started small now it seems like it's leaking more, it's also getting hard to start, I have to apply full throttle without a choke and it takes a while, then white smoke comes out and it has a slight smell I can't tell what that smell is though
Back to top	image_119.jpg I'm going to ride whether I have to push this bike or not! IP Logged

TheProduct2007 Junior Member Offline SuzukiSavage.com Rocks! Posts: 90	Re: Repositioning rectifier, any ideas? Reply #18 - 09/26/13 at 06:52:48 Handle bar clearance
Back to top	image_120.jpg I'm going to ride whether I have to push this bike or not! IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28903 L.A. California Gender:	Re: Repositioning rectifier, any ideas? Reply #19 - 09/26/13 at 07:20:31 You can use anything to space the bars off the tank. 3/8" drive 3/4" sockets with longer bolts will do. Use 3/8" bolts instead of the metric or you'll need to open up the sockets a tad. And get higher strength bolts then the common variety.
Back to top	Versey's Place Tech Section Index IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: Repositioning rectifier, any ideas? Reply #20 - 09/26/13 at 07:33:33 Use grade 5 bolts, grade 8 is overkill.
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

TheProduct2007 Junior Member Offline SuzukiSavage.com Rocks! Posts: 90	Re: Repositioning rectifier, any ideas? Reply #21 - 09/26/13 at 07:46:10 Thanks y'all, those graded bolts, can you get them from Home Depot? I went last night to get some for my perch and they only had machine bolts and those are too weak, strong enough to retread but weak enough to break in half during tightwning
Back to top	I'm going to ride whether I have to push this bike or not! IP Logged

TheProduct2007 Junior Member Offline SuzukiSavage.com Rocks! Posts: 90	Re: Repositioning rectifier, any ideas? Reply #22 - 09/26/13 at 11:59:18 After seeing that picture what do you make out of that oil leak? Head seal cap still or something more serious?
Back to top	I'm going to ride whether I have to push this bike or not! IP Logged

BigTrash YaBB Newbies Offline drink beer hail satan Posts: 29 bradenton florida Gender:	Re: Repositioning rectifier, any ideas? Reply #23 - 09/26/13 at 19:21:33 i took my air box out and and mounted it on the back side of the battery box.
Back to top	IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: Repositioning rectifier, any ideas? Reply #24 - 09/26/13 at 21:26:12 Both Lowes and Home Depot carry them, you just have to search a bit. Push come to shove, NAPA has them behind the counter.
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

Pages: 1 2

« Home