SuzukiSavage.com - Torque Spec sheet

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Torque Spec sheet

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Torque Spec sheet (Read 99 times)

Coaxial Full Member Offline SuzukiSavage.com Rocks! Posts: 184 Toronto, Ontario, Canada Gender:	Torque Spec sheet 08/17/13 at 18:44:29 I refer to this one https://docs.google.com/spreadsheet/ccc?key=0Aum3HeLfjZu8dFJKZWJOSUItY043ZVVnZXY 4LWFjT1E#gid=0 My question is about how accurate this spec sheet is. I noticed something as I was bolting on my brake calipers. The torque sheet listed above says 4.4-5.9 Ft.Lb while my 86-07 Clymers says 18-28 Ft.Lb
Back to top	2007 Suzuki Boulevard S40 Black. K&N Air Filter, Jardine Rumbler Exhaust, Raptor Petcock. 145 Main Jet, 45 Pilot Jet, 1.5x IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 17824
Camp Springs, Kentucky
Gender: male

Re: Torque Spec sheet
Reply #1 - 08/19/13 at 05:23:56

It appears the torque sheet you listed has switched the values of the large mounting bolts and the pin for the pads. The numbers on the list you posted don't seem to agree very well with what we have posted in the Tech Section in this forum.....so I would not trust that list you linked.

Use the Clymers values....or the one in our Tech Section:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1098848534

Someday I will be old......But not today!

IP Logged

Coaxial Full Member Offline SuzukiSavage.com Rocks! Posts: 184 Toronto, Ontario, Canada Gender:	Re: Torque Spec sheet Reply #2 - 08/19/13 at 12:58:29 Yikes.. that link i have above is in the tech section in that post...
Back to top	2007 Suzuki Boulevard S40 Black. K&N Air Filter, Jardine Rumbler Exhaust, Raptor Petcock. 145 Main Jet, 45 Pilot Jet, 1.5x IP Logged

Boofer Serious Thumper Offline Nearly too old. Posts: 1760 N Ms Gender:	Re: Torque Spec sheet Reply #3 - 08/19/13 at 17:12:16 Be sure you're not looking at inch pounds.
Back to top	2001 Black, Spitfire windshield, Headlight upgrade, Sissy rack, Tool bag, Fork bag, Harley muffler, Memory foam seat, Crash bars. Hwy pegs, Raptor. IP Logged

Coaxial

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 184
Toronto, Ontario, Canada
Gender: male

Re: Torque Spec sheet
Reply #4 - 08/19/13 at 19:15:12

No the document listed in the Tech section is completely dangerous. I torqued my brake calipers according to this list:

jvdb wrote on 09/23/12 at 17:09:33:

I put this in google docs, it prints a lot nicer that way.

https://docs.google.com/spreadsheet/ccc?key=0Aum3HeLfjZu8dFJKZWJOSUItY043ZVVn...

As posted on http://suzukisavage.com/cgi-bin/YaBB.pl?num=1098848534

My brake caliper bolts ended up loosening. I lost one of them in transit.

2007 Suzuki Boulevard S40 Black. K&N Air Filter, Jardine Rumbler Exhaust, Raptor Petcock.

145 Main Jet, 45 Pilot Jet, 1.5x

IP Logged

Yoshi Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 870 LongIsland, N.Y. Gender:	Re: Torque Spec sheet Reply #5 - 09/07/23 at 18:35:32 All the torque values seem very low on everything listed… I would think the clutch cover bolts could be tightened to 15 ft lbs Driven pulley nut only 65 ft lbs? I don't think so
Back to top	« Last Edit: 09/11/23 at 19:36:42 by Yoshi » IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home