Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Foot peg (front) replacement
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Foot peg (front) replacement (Read 83 times)
Pine
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1694
Mississippi, USA
Gender:
Foot peg (front) replacement
08/04/13 at 16:22:43
So I removed the front left foot peg. I noticed that it has a "hook" at the end. I found where many are using "ISO" HD pegs and adapting them either by drilling out the hole to use our stock bolt or the more common, replace the bolt with a smaller one and use collars and washers to make up the difference.
However neither of these address the lack of the "hook" on the end of the peg. I just want confirmation that this is not an issue.
Also are all HD pegs "ISO"
Does any HD peg "work" ( as much as any does)
In looking at aftermarket pegs.. is there something to look for that would make the peg "more" adaptable than not?
Back to top
IP Logged
WD
Serious Thumper
2005 No Login
Offline
Professional
"scooter
trash".
Posts: 5207
Rosemark TN
Gender:
Re: Foot peg (front) replacement
Reply #1 -
08/04/13 at 17:10:36
What, you don't like the peg covers in the other thread?
Any male HD peg end is made the same way as any other male HD peg end. You can use any of them, just shim them so they aren't floppy. Man that sounds bad...
Iso pegs aren't worth the money, at the end of the day, it's still just a foot peg. Bring her back up, let's put some floorboards on it like mine...
Back to top
On 2 wheels since 7/87
Black and Chrome 2003 1950s style custom
IP Logged
Pine
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1694
Mississippi, USA
Gender:
Re: Foot peg (front) replacement
Reply #2 -
08/04/13 at 19:50:13
Mine's bent so a rubber cover would still be over a bent peg. BSA is pretty cool, you know I got that soft spot.. but the others got bling!
Though .. not sure i want to go THAT high on bling...
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Foot peg (front) replacement
Reply #3 -
08/04/13 at 19:55:00
Theyre flimsy, try straightening?
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Greg
Serious Thumper
Offline
Molon Labe
Posts: 1251
Southeast PA, uSA
Gender:
Re: Foot peg (front) replacement
Reply #4 -
08/05/13 at 06:44:34
I was able to straighten mine pretty well in a vise. I did replace them with some aftermarket HD pegs. I drilled the holes to fit and added a washer. The lack of 'hooks' allows the peg to droop just a little further than the factory one. For me, this is preferable as it fits my bow legs better.
Back to top
2002 Savage.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 18:36:20
›
General Category
›
Rubber Side Down!
› Foot peg (front) replacement
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.