SuzukiSavage.com - Foot peg (front) replacement

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Foot peg (front) replacement

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Foot peg (front) replacement (Read 83 times)

Pine

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 1694
Mississippi, USA
Gender: male

Foot peg (front) replacement
08/04/13 at 16:22:43

So I removed the front left foot peg. I noticed that it has a "hook" at the end. I found where many are using "ISO" HD pegs and adapting them either by drilling out the hole to use our stock bolt or the more common, replace the bolt with a smaller one and use collars and washers to make up the difference.

However neither of these address the lack of the "hook" on the end of the peg. I just want confirmation that this is not an issue.

Also are all HD pegs "ISO"
Does any HD peg "work" ( as much as any does)
In looking at aftermarket pegs.. is there something to look for that would make the peg "more" adaptable than not?

IP Logged

Serious Thumper
2005 No Login

Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male

Re: Foot peg (front) replacement
Reply #1 - 08/04/13 at 17:10:36

What, you don't like the peg covers in the other thread?

Any male HD peg end is made the same way as any other male HD peg end. You can use any of them, just shim them so they aren't floppy. Man that sounds bad... Roll Eyes

Iso pegs aren't worth the money, at the end of the day, it's still just a foot peg. Bring her back up, let's put some floorboards on it like mine...

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom

IP Logged

Pine Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1694 Mississippi, USA Gender:	Re: Foot peg (front) replacement Reply #2 - 08/04/13 at 19:50:13 Mine's bent so a rubber cover would still be over a bent peg. BSA is pretty cool, you know I got that soft spot.. but the others got bling! Though .. not sure i want to go THAT high on bling...
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Foot peg (front) replacement Reply #3 - 08/04/13 at 19:55:00 Theyre flimsy, try straightening?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Greg Serious Thumper Offline Molon Labe Posts: 1251 Southeast PA, uSA Gender:	Re: Foot peg (front) replacement Reply #4 - 08/05/13 at 06:44:34 I was able to straighten mine pretty well in a vise. I did replace them with some aftermarket HD pegs. I drilled the holes to fit and added a washer. The lack of 'hooks' allows the peg to droop just a little further than the factory one. For me, this is preferable as it fits my bow legs better.
Back to top	2002 Savage. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home