justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
If thats a woodruff key its round on bottom. IF thats how it is, shoot the penetrating oil on it. soak time, then punch & hammer time straight down on the inside end. That raises the outside end & you can slip a dulled chisel in & lightly, slowly, gently bump it out of the slot,, If its a square key, tap it to the end of the slot, build a chisel tip to fit down in the groove & , again, slow & easy , watch whats happening,
|