SuzukiSavage.com - Lancer's Super Cam Chain Questions

Digger

Serious Thumper
2005 No Login

Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male

Lancer's Super Cam Chain Questions
06/25/13 at 20:27:23

Do y'all remember a few years back when Lancer spearheaded a group buy of special cam chains, made by Morse?

I bought one from a board member here recently and it arrived today.

A few questions:

1. Has anyone been using the Morse cam chain long enough to see if the stretch is lessened in comparison to the OEM chain?

2. I (think I) remember reading that the Lancer cam chain would have the letter "M" embossed on its links. I can see no such letters on mine. Are the Lancer cam chains indeed devoid of any markings?

TIA!

Back to top

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com

IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10689 Oklahoma Gender:	Re: Lancer's Super Cam Chain Questions Reply #1 - 06/25/13 at 22:15:12 I don't recall any markings on the chain Digger, but it has been many moons, and it would make sense. Since they were made by Morse it would not surprise me if it may have been there on some of the orders.
Back to top	IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28848
Tucson Az
Gender: male

Re: Lancer's Super Cam Chain Questions
Reply #2 - 06/25/13 at 23:07:55

I bought mine,.. way back... but, haven't installed it yet...
I'm on the second notch of my Versy tensioner...
Don't know if I'll ever actually need it, but... next time I'm in there, I'll probably install it...
If I can remember,.. I'll look for a "M" tomorrow...

..(If I forget,.. send me a PM, to give me a jumpstart)... Huh

...

Back to top

Ludicrous Speed !... ... Huh

...

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Lancer's Super Cam Chain Questions Reply #3 - 06/26/13 at 22:17:36 soak in oil a few hours before install
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28905 L.A. California Gender:	Re: Lancer's Super Cam Chain Questions Reply #4 - 06/26/13 at 23:00:47 The 1st lot had and "M"
Back to top	Versey's Place Tech Section Index IP Logged

Digger

Serious Thumper
2005 No Login

Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male

Re: Lancer's Super Cam Chain Questions
Reply #5 - 07/02/13 at 20:07:57

verslagen1 wrote on 06/26/13 at 23:00:47:

The 1st lot had and "M"

Were there several batches? Did at least one of the later batches not have the "M" on the links?

I'm asking all of these questions because, if, for some reason, I don't end up using the cam chain I just purchased, I'd like to know a few details about it for when I go to sell it.

TIA!

Back to top

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28905 L.A. California Gender:	Re: Lancer's Super Cam Chain Questions Reply #6 - 07/02/13 at 20:29:15 yep, there was 2 batches. I used 1 out of the 1st batch, somewhere I have another.
Back to top	Versey's Place Tech Section Index IP Logged

Oldfeller--FSO

Serious Thumper
ModSquad

Offline

Hobby is now
"concentrated
neuropany"

Posts: 12677
Fayetteville, NC
Gender: male

Re: Lancer's Super Cam Chain Questions
Reply #7 - 07/03/13 at 06:52:27

The original 2 lots of super chain were built by Morse's subsidiary located in Japan and it had the Morse markings. The very last on (the third lot) was done by Lancer and Verslagen and I didn't see any of them.

Way back then we were at the cusp of the Chinese cam chain suppliers taking over the market and we intentionally AVOIDED any chance of getting any of those chains.

I don't think you have the luxury of avoiding Chinese cam chain any more, they have run off the Japanese and Morse hasn't built a chain in America since way before when we bought the first two lots.

Back to top

Former Savage Owner

IP Logged

mjs3790225 Full Member Offline Finally making a presence! Posts: 103 Orlando, Fl Gender:	Re: Lancer's Super Cam Chain Questions Reply #8 - 07/07/13 at 12:17:36 So in today's day and market, who should I be looking towards for a good quality replacement chain? I'm getting close to that time.
Back to top	1996 LS650 - University of Central Florida Complete: Raptor, Dyna, Carb rejet, Seat cover, Cam Chain, HID lamp, front pulley, plug leak MPGs please IP Logged

Digger

Serious Thumper
2005 No Login

Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male

Re: Lancer's Super Cam Chain Questions
Reply #9 - 08/12/13 at 19:48:02

Serowbot wrote on 06/25/13 at 23:07:55:

I bought mine,.. way back... but, haven't installed it yet...
I'm on the second notch of my Versy tensioner...
Don't know if I'll ever actually need it, but... next time I'm in there, I'll probably install it...
If I can remember,.. I'll look for a "M" tomorrow...

..(If I forget,.. send me a PM, to give me a jumpstart)... Huh

...

Gentle bump for Serow.....

Back to top

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com

IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: Lancer's Super Cam Chain Questions Reply #10 - 08/12/13 at 20:31:16 mjs3790225 wrote on 07/07/13 at 12:17:36: So in today's day and market, who should I be looking towards for a good quality replacement chain? I'm getting close to that time. Tsubaki, bulk cam chain. You'll need to get the specs from Lancer, Verslagen or Oldfeller. Hard to find, worth every cent.
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28848
Tucson Az
Gender: male

Re: Lancer's Super Cam Chain Questions
Reply #11 - 08/12/13 at 22:14:14

Terribly sorry, Digger.... I completely forgot...
I see M's on about 30% of links,... not consistently... (probably stamped on one side of each plate)...
I think this one came from Lancer,.. but can't be 100% sure...

They show faintly in this pic...

Apologies again for forgetting... (you're supposed to kick my Azz to remind me)... I'm like a dumb mule...
Grin

...

Back to top

Ludicrous Speed !... ... Huh

...

IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10689 Oklahoma Gender:	Re: Lancer's Super Cam Chain Questions Reply #12 - 08/13/13 at 04:38:49 I found the file on the cam chain orders burried in a parts box in the barn/shop, so if there is significant interest in trying to get more chains then the feelers can be sent out to see if it is still possible, and at what cost.
Back to top	IP Logged

SteveIsGr8 Junior Member Offline SuzukiSavage.com Rocks! Posts: 91 Jamestown, NC	Re: Lancer's Super Cam Chain Questions Reply #13 - 08/13/13 at 07:33:56 I'd be interested in one, but I'd need to know the price before I would commit.
Back to top	IP Logged

Coaxial Full Member Offline SuzukiSavage.com Rocks! Posts: 184 Toronto, Ontario, Canada Gender:	Re: Lancer's Super Cam Chain Questions Reply #14 - 08/13/13 at 09:01:36 I also have interest
Back to top	2007 Suzuki Boulevard S40 Black. K&N Air Filter, Jardine Rumbler Exhaust, Raptor Petcock. 145 Main Jet, 45 Pilot Jet, 1.5x IP Logged