SuzukiSavage.com - Mikuni Carb Main Jet Washer!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Mikuni Carb Main Jet Washer!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Mikuni Carb Main Jet Washer! (Read 60 times)

Built2Last Serious Thumper Offline Tempt Fate Posts: 1447 FTF Gender:	Mikuni Carb Main Jet Washer! 06/21/13 at 11:06:51 Burr side up or down?
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18100 Camp Springs, Kentucky Gender:	Re: Mikuni Carb Main Jet Washer! Reply #1 - 06/21/13 at 12:34:44 I put the smooth side against the carb body (up), and thread the main jet in against the less flat side.
Back to top	Someday I will be old......But not today! IP Logged

Built2Last

Serious Thumper

Offline

Tempt Fate

Posts: 1447
FTF
Gender: male

Re: Mikuni Carb Main Jet Washer!
Reply #2 - 06/21/13 at 13:09:48

Dave wrote on 06/21/13 at 12:34:44:

I put the smooth side against the carb body (up), and thread the main jet in against the less flat side.

So the burr side up? Mine fell out, and I put it back in burr side up.. but there's a rule to which side goes against the surface, but for whatever reason I can't remember (torched those brain cells).. I believe it's smooth side against the surface to prevent gouging..

IP Logged

apache snow-FSO Serious Thumper Offline Posts: 509 Gender:	Re: Mikuni Carb Main Jet Washer! Reply #3 - 06/21/13 at 13:41:19 The factory manual does not specify which way the washer goes so I assume they think it is unimportant. Either way there is not that much torque applied to the main jet when tightening as to cause a problem.
Back to top	2012 Honda Shadow Spirit IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home