Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
Want to replace stock horn with a loud one (Read 410 times)
NorCalRider
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 47
SF, California
Gender: male
Want to replace stock horn with a loud one
02/05/13 at 12:56:46
 
I am having trouble getting attention from the cars so am considering getting a loud horn.

I would love to hear what others on this great board have done. Will also appreciates comments, recommendations, gotchas, etc.

A quick search turned up two candidates:

PIAA 85115      http://www.amazon.com/PIAA-85115-Superior-Bass-Horn/dp/B0060ZB43G, and
Wolo Bad Boy   http://www.amazon.com/Wolo-Model-419-Bad-Horn/dp/B000F5DQWY

Thanks, as always.
Back to top
 
 

1999, Black, Raptor petcock, K&N air filter, otherwise stock. 5,800 miles.
  IP Logged
houstonbofh
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 420
Houston, TX
Gender: male
Re: Want to replace stock horn with a loud one
Reply #1 - 02/05/13 at 13:00:35
 
Check the current draw.  You may need a relay for both...
Back to top
 
 
  IP Logged
NorCalRider
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 47
SF, California
Gender: male
Re: Want to replace stock horn with a loud one
Reply #2 - 02/05/13 at 13:10:41
 
The reviews mention a need to add relay and a 20 amp fuse; apparently 10 amp fuse is not sufficient.

Will that much current draw have any negative impact on the rest of the electrical system?
Back to top
 
 

1999, Black, Raptor petcock, K&N air filter, otherwise stock. 5,800 miles.
  IP Logged
Gyrobob
Serious Thumper
*****
Offline

Posers ain't
motorcyclists

Posts: 2571
Newnan, GA
Gender: male
Re: Want to replace stock horn with a loud one
Reply #3 - 02/05/13 at 14:37:17
 
Horns like that do draw a lot of amps, but usually for less than a second at a time, so it won't hurt your system if you hook it up directly to your battery with a fuse.  

Use a relay,....
-- The horn switch would get fried with that much current.
-- The horn will be a lot louder because the wiring for the original horn has too much resistance.

Of your two choices, the Wolo air compressor horn will be waaaaaayy louder.




Back to top
 
 

If you think there's good in everyone, you haven't met everyone.
  IP Logged
Digger
Serious Thumper
2005 No Login
*****
Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male
Re: Want to replace stock horn with a loud one
Reply #4 - 02/05/13 at 18:45:56
 
Here's a rather off-beat suggestion:

I replaced the standard cheapo horn on another bike of mine (an '01 ST1100) with a 6 volt VW horn of the same design.

That 6 v. horn really seems to scream when hit with 12 of those volts.....and no relay was needed on that bike!

YMMV!
Back to top
 
 

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com
WWW   IP Logged
thumperclone
Serious Thumper
Alliance Member
*****
Offline

PGR rider  riding
with respect

Posts: 5822
Grand Junction Colorado
Gender: male
Re: Want to replace stock horn with a loud one
Reply #5 - 02/05/13 at 21:23:37
 
i got a low tone auto horn from auto zone no relay needed
Back to top
 
 

standing for those who stood for US
















  IP Logged
jgrandmont
YaBB Newbies
*
Offline



Posts: 39
Buzzards Bay, MA
Gender: male
Re: Want to replace stock horn with a loud one
Reply #6 - 02/06/13 at 14:49:08
 
I added a second horn. Had to relocate the stock horn to the right-hand side of the bike to accommodate the design of the second one.

Back to top
 
 

'09 Suzuki Boulevard S40
  IP Logged
RidgeRunner13
Serious Thumper
*****
Offline

haulin' the
groceries!

Posts: 649
Mustang Island, Texas
Gender: male
Re: Want to replace stock horn with a loud one
Reply #7 - 02/06/13 at 15:10:08
 
jgrandmont wrote on 02/06/13 at 14:49:08:
I added a second horn. Had to relocate the stock horn to the right-hand side of the bike to accommodate the design of the second one.

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/578735_3488446246412_1574155307_n.jpg


You need to turn that horn over & mount IT on the other side so any water getting in it can drain out. The way it is now any water that gets in will be trapped & ruin it.
DON"T ask how I know, you can screw up a lot of things in 45 years of riding, maintaining, & modifying bikes! Cool
Back to top
 
 

Wind me up & watch me run, I ain't never had too much fun!
  IP Logged
Gyrobob
Serious Thumper
*****
Offline

Posers ain't
motorcyclists

Posts: 2571
Newnan, GA
Gender: male
Re: Want to replace stock horn with a loud one
Reply #8 - 02/06/13 at 17:18:21
 
thumperclone wrote on 02/05/13 at 21:23:37:
i got a low tone auto horn from auto zone no relay needed


Use a relay and the horn will be louder.
Back to top
 
 

If you think there's good in everyone, you haven't met everyone.
  IP Logged
NorCalRider
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 47
SF, California
Gender: male
Re: Want to replace stock horn with a loud one
Reply #9 - 02/06/13 at 17:31:08
 
jgrandmont wrote on 02/06/13 at 14:49:08:
I added a second horn. Had to relocate the stock horn to the right-hand side of the bike to accommodate the design of the second one.

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/578735_3488446246412_1574155307_n.jpg



Which horn is it and how loud?
Back to top
 
 

1999, Black, Raptor petcock, K&N air filter, otherwise stock. 5,800 miles.
  IP Logged
jgrandmont
YaBB Newbies
*
Offline



Posts: 39
Buzzards Bay, MA
Gender: male
Re: Want to replace stock horn with a loud one
Reply #10 - 02/07/13 at 18:11:43
 
Don't remember exactly where I got it. Somewhere overseas, I believe. Maybe Taiwan? It's not super loud, but it is a bit louder than the stock horn -- more of an air horn sound instead of the "beep beep" sound of the stock one. I think the two of them together sound pretty good. It doesn't need a relay. If you're interested, I could try to dig up the info on where I bought it.
Back to top
 
 

'09 Suzuki Boulevard S40
  IP Logged
Cavi Mike
Serious Thumper
*****
Offline

Thumper n00b

Posts: 1005
Rochester, NY
Gender: male
Re: Want to replace stock horn with a loud one
Reply #11 - 02/07/13 at 22:07:18
 
Stay away from the PIAA horn. It won't be anywhere near worth the $50. I recommend getting the "Low tone" horn as well from AutoZone/Advanced. Every time I buy a Japanese vehicle that's one of the first things I do.

This one:
http://www.autozone.com/autozone/accessories/Blazer-Low-tone-replacement-horn...

You gotta get the one with the physical horn on it. The one that looks just like stock won't work as well even though they're identical underneath. It's that horn (the coiled shell) that focuses the sound and gives it that blast that grabs attention.
Back to top
 
 
  IP Logged
Gyrobob
Serious Thumper
*****
Offline

Posers ain't
motorcyclists

Posts: 2571
Newnan, GA
Gender: male
Re: Want to replace stock horn with a loud one
Reply #12 - 02/08/13 at 19:06:27
 
If you want cheap, just go to an auto junkyard and get any horn that has a "trumpet" on it, coiled or otherwise.

Any horn needs lots of amps for a very short time.  
-- The compressor horns need a lot of amps in short bursts.  Restrict the amperage and they will work, but the compressor turns over more slowly, pumping less air, delaying the noise, and making less noise.
-- If you don't use a relay, you are using several feet of skinny wire that goes up to and back from the switch.  
   --- All that resistance lowers the amperage some, so set up a relay where the main feed that goes from the battery to the relay to the horn is as short as possible and is a fairly thick wire.  
   --- You'd be amazed at how much louder any 12v horn is when it uses 2 feet of 12 gauge wire to get the juice from the battery to the horn rather than 8 feet of 16 gauge wire.
Back to top
 
« Last Edit: 02/09/13 at 06:13:37 by Gyrobob »  

If you think there's good in everyone, you haven't met everyone.
  IP Logged
Dj12midnit
Serious Thumper
Alliance Member
*****
Offline

If you'r here and
I'm here isn't this
our time?

Posts: 1036
Lynden Wa.
Gender: male
Re: Want to replace stock horn with a loud one
Reply #13 - 02/08/13 at 19:40:45
 
I dont use the horn, I find I get more attention is I roll up next to them and kick the door.
Back to top
 
 

http://www.suzukiownersclub.net

2006 Progressive 412-4236C, Big Crank, TKat F\B, ME880 Rear.
  IP Logged
Boofer
Serious Thumper
*****
Offline

Nearly too old.

Posts: 1760
N Ms
Gender: male
Re: Want to replace stock horn with a loud one
Reply #14 - 02/08/13 at 23:23:32
 
I got the Auto Zone horn for less than $20 a couple of years ago. Drilled a small hole in the trumpet so water could drain. Spent more time hunting drill bit and opening horn claw package than actual install time. Bolts up and hooks right on spade terminal.
Back to top
 
 

2001 Black, Spitfire windshield, Headlight upgrade, Sissy rack, Tool bag, Fork bag, Harley muffler, Memory foam seat, Crash bars. Hwy pegs, Raptor.
  IP Logged
Pages: 1 2 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
05/17/24 at 15:08:22



General CategoryRubber Side Down! › Want to replace stock horn with a loud one


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.