SuzukiSavage.com - DIY integratd tail/brake/turns- completed!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › DIY integratd tail/brake/turns- completed!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

DIY integratd tail/brake/turns- completed! (Read 205 times)

diamond jim

Serious Thumper

Offline

Posts: 1425
North Alabama
Gender: male

DIY integratd tail/brake/turns- completed!
01/03/13 at 10:33:31

I'm starting a new integrated LED tail/brake/turn signals project for my meanie. Although our bikes are different the parts and methods are all the same. If there's interest on the forum for a write up then I'll start a thread with steps and updates. The S40 may or may not be a good candidate for such a mod. Not sure. So if no interest, no problem.

« Last Edit: 01/10/13 at 20:26:11 by diamond jim »

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: DIY tail/brake/turns combo Reply #1 - 01/03/13 at 11:22:02 your projects are always welcome, it may not be repeated, but the knowledge used for sure.
Back to top	Versey's Place Tech Section Index IP Logged

sbrice54 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 39 sheboygan, wi	Re: DIY tail/brake/turns combo Reply #2 - 01/03/13 at 14:45:14 Bring it on!!!
Back to top	IP Logged

diamond jim

Serious Thumper

Offline

Posts: 1425
North Alabama
Gender: male

Re: DIY tail/brake/turns combo
Reply #3 - 01/03/13 at 21:35:24

Will do then.

How ya like my redneck workstation thrown together from whatever I had laying around in the garage?

It's got 120 switched for soldering iron and work light, 12V constant, 12V swtiched, soldering station, beadboard and ESD grounding strap with 1 mega ohm resistor. Cost- $0.

As I finish working out the circuit details I'll start a fresh how-to thread with pics of parts and processes.

IP Logged

MiCTLaN Full Member Offline O_o Posts: 148 Winter Haven, FL	Re: DIY tail/brake/turns combo Reply #4 - 01/04/13 at 06:27:04 That's a pretty sexy setup, count me among the jealous.
Back to top	IP Logged

Pine Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1694 Mississippi, USA Gender:	Re: DIY tail/brake/turns combo Reply #5 - 01/04/13 at 06:55:26 Wow thats Awesome! Hmm wel if your gonna get THAT fancy... I expect you to work and arduino in the project!!
Back to top	IP Logged

diamond jim Serious Thumper Offline Posts: 1425 North Alabama Gender:	DIY int tail light Reply #6 - 01/05/13 at 13:28:15 Almost done..
Back to top	« Last Edit: 01/10/13 at 20:23:35 by diamond jim » IP Logged

diamond jim Serious Thumper Offline Posts: 1425 North Alabama Gender:	Re: DIY tail/brake/turns combo Reply #7 - 01/10/13 at 20:06:43 I got my DIY integrated tail light completed. Here's a vid. http://s255.beta.photobucket.com/user/russ_diamond_jim/media/completedintegra... In the next couple of weeks I'll put together a how-to thread.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home