Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Post 95 wiring harness on an 87 bike.
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Post 95 wiring harness on an 87 bike. (Read 33 times)
srinath
Serious Thumper
Offline
I love YaBB 1G -
SP1!
Posts: 5349
Post 95 wiring harness on an 87 bike.
10/30/12 at 10:57:50
I am thinking of running an 96 wiring harness on this 87 I got. Cos I cannot find the rear cover of the start switch unit. And that switch wont come off the wiring ...
Therefore I want to swap the wiring to one where I got the switch assy that can be unplugged.
So what would work/not work and what needs to be modded if I want to use an 96 and later harness on my 87.
Thanks.
Srinath.
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: Post 95 wiring harness on an 87 bike.
Reply #1 -
10/30/12 at 11:26:04
Front brake switch and cdi is all that I can recall.
brake switch goes from a wiper and plate contacts to a modular switch.
cdi connector is different, don't swap cdi's unless you swap the rotor too.
I have an '88 wiring and control set if you want to swap, but i'd want to swap the whole set. not just one control.
Back to top
Versey's Place
Tech Section Index
IP Logged
srinath
Serious Thumper
Offline
I love YaBB 1G -
SP1!
Posts: 5349
Re: Post 95 wiring harness on an 87 bike.
Reply #2 -
10/30/12 at 11:33:32
verslagen1 wrote
on 10/30/12 at 11:26:04:
Front brake switch and cdi is all that I can recall.
brake switch goes from a wiper and plate contacts to a modular switch.
cdi connector is different, don't swap cdi's unless you swap the rotor too.
I have an '88 wiring and control set if you want to swap, but i'd want to swap the whole set. not just one control.
OK I have the 87 CDI and the wiring as well, just that start switch back cover is not there.
Front brake not an issue, I have 96+ brakes to put in if needed.
The pins of the cdi on 96 to the wiring are different in location but the outer housing for the pins are the same ?
So I can pull the terminals out of the molex connector and swap em with the color codes of the 87 as reference ?
Cool.
Srinath.
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: Post 95 wiring harness on an 87 bike.
Reply #3 -
10/30/12 at 11:40:38
Different number of pins, different connector.
See the tech section for a pin out chart.
You might be able to pull the pins out of one and shove it in the other.
Back to top
Versey's Place
Tech Section Index
IP Logged
srinath
Serious Thumper
Offline
I love YaBB 1G -
SP1!
Posts: 5349
Re: Post 95 wiring harness on an 87 bike.
Reply #4 -
10/30/12 at 13:45:18
verslagen1 wrote
on 10/30/12 at 11:40:38:
Different number of pins, different connector.
See the tech section for a pin out chart.
You might be able to pull the pins out of one and shove it in the other.
I cant find it in the tech section, But I will get it and work on it and post back.
Thanks vers.
Cool.
Srinath.
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: Post 95 wiring harness on an 87 bike.
Reply #5 -
10/30/12 at 14:47:41
cdi connector
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1293638302
Back to top
Versey's Place
Tech Section Index
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/29/24 at 20:36:14
›
General Category
›
Rubber Side Down!
› Post 95 wiring harness on an 87 bike.
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.