SuzukiSavage.com - Speedo Cable connetion on motor

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Speedo Cable connetion on motor

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Speedo Cable connetion on motor (Read 115 times)

rfw2003

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 1108
Yantis, TX

Speedo Cable connetion on motor
08/28/12 at 16:25:26

Well I searched all the stores in my area and I never could find anything that can be used as a cap for the speedo port. So I ended up taking my dremel tool and cutting the nut off. Bought a rubber stopper that fit tight in the nut and cut it about 1/4" thick and pushed it up in there to use as a gasket and to plug off the hole in the nut. Seems to be working good. Only put about 30 miles on it so far and no leaks.

R.F.

1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler

IP Logged

Cavi Mike Serious Thumper Offline Thumper n00b Posts: 1005 Rochester, NY Gender:	Re: Speedo Cable connetion on motor Reply #1 - 08/28/12 at 16:35:56 Please tell me you did that with the side cover off and you made sure to wash away the grindings that fell into the crankcase...
Back to top	IP Logged

rfw2003 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1108 Yantis, TX	Re: Speedo Cable connetion on motor Reply #2 - 08/28/12 at 16:38:38 Cavi Mike wrote on 08/28/12 at 16:35:56: Please tell me you did that with the side cover off and you made sure to wash away the grindings that fell into the crankcase... I cut the speedo cable not the drive gear housing. Did the cut with the cable totally off the bike.
Back to top	1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17823 Camp Springs, Kentucky Gender:	Re: Speedo Cable connetion on motor Reply #3 - 08/28/12 at 18:18:36 That looks good and will do the job. If you get bored with it......you can put a little music box kind of ballerina on there and let her spin around when you go riding!
Back to top	Someday I will be old......But not today! IP Logged

ToesNose Serious Thumper Offline Pardon me, do you have Hot Sauce? Posts: 1993 Mooresville, NC Gender:	Re: Speedo Cable connetion on motor Reply #4 - 08/28/12 at 19:05:20 Dave wrote on 08/28/12 at 18:18:36: That looks good and will do the job. If you get bored with it......you can put a little music box kind of ballerina on there and let her spin around when you go riding! I needed a good laugh, what a visual
Back to top	The Suzuki LS650, bringing Miles of Smiles everywhere! IP Logged

RanDaMan Full Member Offline SuzukiSavage.com Rocks! Posts: 149 Massachusetts Gender:	Re: Speedo Cable connetion on motor Reply #5 - 08/29/12 at 08:41:12 You dont need a speedo?
Back to top	IP Logged

rfw2003 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1108 Yantis, TX	Re: Speedo Cable connetion on motor Reply #6 - 08/29/12 at 10:01:30 RanDaMan wrote on 08/29/12 at 08:41:12: You dont need a speedo? I have a Trail Tech Vapor on mine. It uses a magnetic sensor on the front wheel. R.F.
Back to top	1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler IP Logged

Cavi Mike Serious Thumper Offline Thumper n00b Posts: 1005 Rochester, NY Gender:	Re: Speedo Cable connetion on motor Reply #7 - 08/29/12 at 10:19:22 Looks pretty good.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home