Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Dumb Question about Rear Spokes
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
Dumb Question about Rear Spokes (Read 343 times)
John in Kalifornia
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 127
Re: Dumb Question about Rear Spokes
Reply #15 -
08/28/12 at 08:24:43
Could you illustrate the 124mm spoke length lacing? The 148-150 mm follows the same pattern as the stock Savage 16 inch wheel. The angle is therefore less than the original, and matches up exactly to the Mike's XS rim, whose hole pattern is correct for an 18 inch drum brake setup.
The shorter 124mm length implies fewer "crosses" of the spokes.
John in Kalifornia
Back to top
IP Logged
Spamy
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 224
Re: Dumb Question about Rear Spokes
Reply #16 -
08/28/12 at 13:15:42
This is how it looks. It matches the angle of the rims holes perfectly. I dont think I would compare to the stock angles. The rim is much much smaller and so are the spokes. Its not apples to apples. If you compare it to the front rim its a similar pattern.
Ive laced many dirt bike rims and they all have this similar pattern. They exert more hp and torque considering the lower gearing as well as fall 20 feet out of the air on flat ground with no issues.
Back to top
IP Logged
braveteacher
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 154
Re: Dumb Question about Rear Spokes
Reply #17 -
09/08/12 at 13:10:43
If you go here you can see that their has been problems in the past with RYCA and their rear rim...However, I recently bought the spokes and purchased a rim on ebay...drilled out the spoke holes...spokes were supplied all the same with same angles...and it laced up just fine...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304722902/180
Here is my web site with a pic of my spoke job...
http://suzuki-s40-ratbrat.weebly.com/page-3.html
You can see in the pics on page 2 and 3 that the spokes are not bent at all...laced up just fine.
James
Back to top
IP Logged
Spamy
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 224
Re: Dumb Question about Rear Spokes
Reply #18 -
09/09/12 at 16:28:23
Your bike looks great so far braveteacher. Nice work. Your wheel looks pretty good, but from the picture you can see that it is still tweaked. The spokes should be pulled straight and you can see where the spokes are bent and pulled to one side where the gap in the nipples are.
It will perform find and 8/10 probably would never notice it.
Uploaded with
ImageShack.us
Back to top
IP Logged
braveteacher
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 154
Re: Dumb Question about Rear Spokes
Reply #19 -
09/10/12 at 03:19:43
I should
not
have said "Not bent at all" LOL Nothing is perfect...but it is well within the allowable limits of rim lacing...Dont I sound like I know what I am talking about...first rim I have ever laced...LOL I hope I am one of thoes 8 that dont notice it or I will be hitting you up for those spokes you purchased...LOL
Back to top
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 19:36:27
›
General Category
›
Rubber Side Down!
› Dumb Question about Rear Spokes
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.