SuzukiSavage.com - experience with HF rivet guns

splash07

Serious Thumper

Offline

Posts: 911
Charleston, SC
Gender: male

experience with HF rivet guns
08/03/12 at 11:38:29

I just got a '14 duracraft aluminum boat from my boss. It is in great shape but it is starting to pop rivets. I was considering buying a HF rivet gun and was wondering if anyone has any experience with them? What should I be looking for and what size should I be looking for? Thanks in advance

something like this maybe?
http://www.harborfreight.com/1-4-quarter-inch-air-hydraulic-riveter-98898.html

Back to top

IP Logged

Cavi Mike

Serious Thumper

Offline

Thumper n00b

Posts: 1005
Rochester, NY
Gender: male

Re: experience with HF rivet guns
Reply #1 - 08/03/12 at 11:59:46

Unless you're gonna be building a boat, an $80 air-powered riveter seems a bit overkill, don't you think? A hand riveter will be just fine, they can be had for less than $10.

I have this one that I've used a handful of times and it does its job just fine.
http://www.harborfreight.com/hand-riveter-set-38353.html

But of course if your boat uses larger rivets this won't work.

Back to top

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28888 L.A. California Gender:	Re: experience with HF rivet guns Reply #2 - 08/03/12 at 12:02:35 Got one of those for my brother. works fine, he used it alot.
Back to top	Versey's Place Tech Section Index IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: experience with HF rivet guns Reply #3 - 08/03/12 at 12:08:33 Yeah I need at least 1/4" rivets for this boat.
Back to top	IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: experience with HF rivet guns
Reply #4 - 08/03/12 at 12:31:38

If I was gonna be doin very many 1/4" rivets, Id sure want something that handles it without a lot of strength required. IDK what kind of clearance youll need, if they go in from the outside,, or what,,
Why is it poppin rivets? YOu got a 150 HP outboard on it makin 65 MPH on the water?
What are you gonna put in the seams before you rivet it back? Anything?

Back to top

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: experience with HF rivet guns Reply #5 - 08/03/12 at 12:41:18 poppin rivets cuz its 32 years old, it only had a 15 on it so not overpowered. clearance should not be an issue. I plan on using 5200 on the seams.
Back to top	IP Logged

arteacher Serious Thumper Offline Ride as if your naked and invisable! Posts: 2581 London ontario Gender:	Re: experience with HF rivet guns Reply #6 - 08/03/12 at 13:22:10 You can't use blind rivets on a boat- they will leak, as they have a hole in them. You have to use regular aluminum rivets, a hand held anvil, and a hammer. I have done this kind of repair before.
Back to top	white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt IP Logged

John_D FSO

Serious Thumper

Offline

Ridin' and smilin'

Posts: 1658
Vancouver, WA
Gender: male

Re: experience with HF rivet guns
Reply #7 - 08/03/12 at 15:51:08

Dad had this problem on an old aluminum boat we got from Grandpa years and years ago (as long as I can remember, so over 36 years), because they had an overpowered motor on it. Even used to have a framework on the back to beef it up, although Dad took it off because we only ever used oars with it. Anyway... he just drilled the bad ones out and replaced them with machine screws. Wasn't a perfect seal, but you could fish all day and only have around an inch of water in the bottom. Plus, it's easier having small kids hold a pair of pliers on a nut on the inside, than try and line a block of metal up in the inside for an anvil! Grin

Back to top

'07 ElectraGlide.

IP Logged

splash07

Serious Thumper

Offline

Posts: 911
Charleston, SC
Gender: male

Re: experience with HF rivet guns
Reply #8 - 08/23/12 at 11:47:24

So I ended up going with one of the hand operated ones, like this:

And after doing some research I learned that others have used pop blind rivets with no problems. The trick is to use a closed end aluminum rivet with a touch of silicone sealant, like this:

I have already popped a few in and they seem pretty strong but I have not tested it in the water yet so i dont know how well they will hold up or if they will leak. More updates to come. Cheesy

Back to top

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: experience with HF rivet guns Reply #9 - 08/23/12 at 21:34:59 We used a rivet gun kinda like that to replace the rivets when we had to replace a window regulator. OUrs wasnt so nice as to catch the pin, tho, like yours. Thats a pretty macho gun. Did that come from HF?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: experience with HF rivet guns Reply #10 - 08/23/12 at 22:18:41 yup, 20 bucks and 50 rivets came with the package. Im not using their rivets though because they arae open end.
Back to top	IP Logged