Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Installing Signal Lite Beeper
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
Installing Signal Lite Beeper (Read 170 times)
Cavi Mike
Serious Thumper
Offline
Thumper n00b
Posts: 1005
Rochester, NY
Gender:
Re: Installing Signal Lite Beeper
Reply #15 -
07/19/12 at 20:06:01
rfw2003 wrote
on 07/19/12 at 19:48:04:
Well you can still wire off the flasher just by adding a standard automotive 30amp relay to the circuit. Just put your buzzer on terminal 87A, and on terminal 30 to a 12v power source that is only on when the key is on then it will only supply the power to the buzzer when the flasher is cutting the power to the circuit.
You could use any relay that has both NO and NC contacts on it like the standard automotive 30 amp relay. There are many out there that are smaller that can be had.
If you need me to draw you up a simple wiring diagram of this let me know.
R.F.
Just put it across the terminals of the flasher relay. It will beep opposite the flash but it will beep nonetheless.
*edit* I wouldn't use anything beside a piezo beeper though, anything else will draw too much current and affect the flash-rate, possibly even stop it from flashing.
Back to top
IP Logged
rfw2003
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1108
Yantis, TX
Re: Installing Signal Lite Beeper
Reply #16 -
07/19/12 at 20:12:55
Cavi Mike wrote
on 07/19/12 at 20:06:01:
rfw2003 wrote
on 07/19/12 at 19:48:04:
Well you can still wire off the flasher just by adding a standard automotive 30amp relay to the circuit. Just put your buzzer on terminal 87A, and on terminal 30 to a 12v power source that is only on when the key is on then it will only supply the power to the buzzer when the flasher is cutting the power to the circuit.
You could use any relay that has both NO and NC contacts on it like the standard automotive 30 amp relay. There are many out there that are smaller that can be had.
If you need me to draw you up a simple wiring diagram of this let me know.
R.F.
Just put it across the terminals of the flasher relay. It will beep opposite the flash but it will beep nonetheless.
*edit* I wouldn't use anything beside a piezo beeper though, anything else will draw too much current and affect the flash-rate, possibly even stop it from flashing.
The coil of the relay will only draw 160ma at 13.6v so it's like adding approx 2 single LEDs in there, That isn't' gonna affect the flash rate any at all.
Back to top
1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler
IP Logged
Routy
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2280
Winston Oregon
Gender:
Re: Installing Signal Lite Beeper
Reply #17 -
07/19/12 at 22:56:07
Ok, those (more than one) who said that connecting a piezo across (or in parallel w/) the flasher would work, is absolutely correct ! It works perfectly, and the flashers are still at or near the same rate. How could it be so simple,.....not even having to take the tank off or anything.
Thanks to all
Routy
Back to top
Rich
'07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055)
IP Logged
rfw2003
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1108
Yantis, TX
Re: Installing Signal Lite Beeper
Reply #18 -
07/19/12 at 23:05:59
Routy wrote
on 07/19/12 at 22:56:07:
Ok, those (more than one) who said that connecting a piezo across (or in parallel w/) the flasher would work, is absolutely correct ! It works perfectly, and the flashers are still at or near the same rate. How could it be so simple,.....not even having to take the tank off or anything.
Thanks to all
Routy
YW, As for how could it be so simple, it's the central point of the turn signal system that is why
Back to top
1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 21:29:48
›
General Category
›
Rubber Side Down!
› Installing Signal Lite Beeper
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.