try this on for size!

this was all custom fabed i got the idea and ran with it.
as far as the foot clutch goes, i used some of the original parts, shift lever, and shift lever pivot pin. as you can see i made my own foward controls. i used a socket wrench handle welded onto the shift lever for my clutch pedal and made my own wire linkage out of some 3/8 ss tubing. ill have to get a better pic of the back side for you. but you can see i just shortened the cable and ran it around the side of the motor.

for the jockey shifter, one of my favorite thing on this bike! i used the original arm for the shifter shaft. i turned it up and welded a 1/2 chrome rod to it, with a bend or two for clearance when i shift and a 3/8 bolt welded on the other end for the linkage. the linkage is just a couple of tierod ends and some 3/8 bolts welded together side by side for a slight offset. the shifter arm is the same chrome rod, with a 3/8 bolt on one end and a small piece of 3/4 ss pipe for the pivot. on the frame i welded a 3/4 ss bolt for shifter arm to pivot on, and capped it off with a ss acorn nut.

it shifts smooth and is one fun ride!  

WD wrote on 07/18/12 at 16:29:26:


P.M. will do just fine.  

5 cents from me
my bike,  but the girl no

sorry for my english. I want to say: bike is mine, girl is not mine.

Work in progress, as usual:

So where does she hide the hand cuffs ?  

Hmmmm ? ? ?  

Or do you keep them  ? ?    

Very nice photo's dude.  I personally like this style of dress on a woman...especially when on a motorcycle.

And YES, you WIN.