SuzukiSavage.com - Clymer error on clutch wear limits?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Clymer error on clutch wear limits?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Clymer error on clutch wear limits? (Read 44 times)

RycaShawn

Full Member

Offline

Ryca Fan

Posts: 145
Los Angeles
Gender: male

Clymer error on clutch wear limits?
06/05/12 at 09:17:08

Do they have identified backwards the No 1 and No 2 clutch discs? I am measuring my No1 (single disc) and it seems to match the No 2 specs, and all my No 2 discs match the No 1 specs. Correct or am I the one that is backasswards? Huh

Also, at the wear limits, does that create a clutch that slips or is it possible that it can still work past the thickness limits? Looking for answers based on experience...

IP Logged

BuckRYCA Senior Member Offline Posts: 258 New London, CT, USA Gender:	Re: Clymer error on clutch wear limits? Reply #1 - 06/05/12 at 13:29:53 Yes, they do have it backwards. (I fell into that trap already.)
Back to top	'96 Savage - now a Ryca CS-1 IP Logged

360k+ Serious Thumper Offline Savage heart of darkness Posts: 680 Cartersville, GA Gender:	Re: Clymer error on clutch wear limits? Reply #2 - 06/05/12 at 19:35:51 Ha! You ought to see the wiring diagrams in the shop manual. I've found several outright errors.
Back to top	The JOURNEY is the reward! IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: Clymer error on clutch wear limits?
Reply #3 - 06/05/12 at 22:45:11

verslagen1 wrote on 01/10/09 at 09:22:53:

http://verslagen.savageriders.com/images/ClutchExploded.jpg

http://verslagen.savageriders.com/images/ClutchPlateDims.jpg

Direct from an '86 SSM for a LS650.

OK, working from the clutch basket, item 14 (the round thingy that looks like someones crown)
Item 12 (aka plate 1, skinny plate) goes on 1st. Followed by 4 others.
Then item 10 (aka plate 2, fat plate) goes on last. And the wave washer sits inside it.

And checked it against an '86-'88 Clymer, and has them identified backwards in the exploded diagram. Another documented error.

http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1119775997

Versey's Place
Tech Section Index

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home