SuzukiSavage.com - Clutch push rod won't move

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Clutch push rod won't move

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Clutch push rod won't move (Read 83 times)

wombat

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 109

Clutch push rod won't move
04/11/12 at 06:58:37

I took the crankcase covers off to powdercoat them. Before reassembly I tried to push in the little pin (clutch push rod) that activates the clutch, but it wouldn't budge. So, I figured that once the cover was on the cover's clutch lever would have a better chance of doing it rather than my soft little finger. But, noooo. The lever hits the rod and nothing happens.
Any idea of what might be wrong?

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Clutch push rod won't move Reply #1 - 04/11/12 at 07:01:48 Can ya pull it out?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28905 L.A. California Gender:	Re: Clutch push rod won't move Reply #2 - 04/11/12 at 08:23:06 How long did you have it dry? Might be just stuck. And yeah, it'll take a lot of force to push it in by hand. imagine the leverage you get from the clutch lever on the outside of the case vs. inside. and the outside you still need some help.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Clutch push rod won't move Reply #3 - 04/11/12 at 08:55:57 If I have the cable off the lever on the case, I have to put a crescent wrench on the arm to move it up, which is how I disconnect the clutch cable, so I dont have to mess with all those adjustments.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

wombat Full Member Offline SuzukiSavage.com Rocks! Posts: 109	Re: Clutch push rod won't move Reply #4 - 04/11/12 at 12:19:26 The pin slips in and out of its hole quite easily. justin_o_guy2 wrote on 04/11/12 at 07:01:48: Can ya pull it out?
Back to top	IP Logged

wombat Full Member Offline SuzukiSavage.com Rocks! Posts: 109	Re: Clutch push rod won't move Reply #5 - 04/11/12 at 14:27:16 Yup! A wrench had enough leverage to make it moves. Feels okay now. Thanks! justin_o_guy2 wrote on 04/11/12 at 08:55:57: If I have the cable off the lever on the case, I have to put a crescent wrench on the arm to move it up, which is how I disconnect the clutch cable, so I dont have to mess with all those adjustments.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Clutch push rod won't move Reply #6 - 04/11/12 at 23:09:09 Well Awwrite,,
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home